{"title":"Air Compressor Accessories","description":"\u003cp\u003eOutfit your setup with air compressor accessories designed to improve performance, safety, and longevity. We stock gauges, drain valves, lubricators, intake filters, and more—everything you need to fine-tune or maintain your system. Need something else? See our \u003ca href=\"https:\/\/compressor-source.com\/collections\/new-air-compressor-repair-parts\" title=\"Air Compressor Repair Parts\"\u003ecompressor parts\u003c\/a\u003e and \u003ca href=\"https:\/\/compressor-source.com\/collections\/new-hoses-and-fittings-1\" title=\"Compressor Hoses and Fittings\"\u003ehoses and fittings\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"four-port-95-125-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 95 - 125 PSI 16 Amp 69MB7LY2C-Switch","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 95-125 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet hook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1\/4\" female NPT. This switch is also equipped with a on and off lever and a unloader valve on the side, which is 1\/4\" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAIR INLETS:  FOUR 1\/4\" NPT FEMALE PORTS, WHICH CAN BE CHANGED TO MALE USING A PIPE NIPPLE THAT CAN BE BOUGHT AT A LOCAL HARDWARE STORE.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eUNLOADER SIZE: 1\/4\" COMPRESSION \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eEQUIPPED WITH MANUAL ON AND OFF LEVER\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePRESSURE SETTING: TURNS ON AT 95 PSI AND SHUTS OFF AT 125 PSI, CAN BE ADJUSTED FOR CUSTOM SETTING WHICH IS EXPLAINED UNDER THE LID OF THE PRESSURE SWITCH.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePOWER AND AMP RATING: 20 AMPS MAX AT 120 VOLT, 12 AMPS MAX AT 240 VOLT SINGLE PHASE, 9.6 AMPS MAX AT 240 VOLT 3 PHASE. \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e( IF YOU HAVE A LARGER INDUSTRIAL COMPRESSOR WITH A MAGNETIC STARTER AMPS DO NOT MATTER, ALL THE SWITCH IS DOING IS TELLING THE STARTER WHEN TO SHUT ON AND OFF).\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e12 VOLT POWER DC: 8.6 AMPS AT 32 VOLTS DC, 3.1 AMPS AT 120 VOLT DC, 1.6 AMPS AT 240 VOLT DC.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487006486594,"sku":"69MB7LY2C-Switch","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/69mb7ly2c-switch-1-cs.jpg?v=1677110085"},{"product_id":"four-port-145-175-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 145 - 175 PSI  16 Amp 69MB9LY2C-Switch","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new 145-175 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet hook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1\/4\" female NPT. This switch is also equipped with a on and off lever and a unloader valve on the side, which is 1\/4\" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eAir Inlets: Four 1\/4\" NPT Female Ports, which can be changed to Male using a pipe nipple that can be purchased at a local hardware store.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eUnloader Size: 1\/4\" Compression\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eEquipped with Manual On and Off Lever\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePressure Setting: Turns on at 145 PSI and shuts off at 175 PSI, can be adjusted for custom settings which is expalined under the lid of the pressure switch.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePower\/Amp Rating: 20 Amps max at 120 Volt \/ 12 Amps at 240 Volt \/ 9.6 Ams at 3 PH 240 Volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e(If you have a larger Industiral compressor with a magnetic starter, amps do not matter, all the switch is doing is telling teh starter when to turn off and on.)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e12 Volt Power DC: 8.6 Amps at 32 Volts DC, 3.1 Amps at 120 Volts DC, 1.6 Amps at 240 Volt DC.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486451462210,"sku":"69MB9LY2C-Switch","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/69mb9ly2c-switch-1-cs.jpg?v=1677088385"},{"product_id":"heavy-duty-25-amp-140-175-psi-four-port-air-compressor-pressure-switch","title":"4 Port Pressure Switch 140 - 175 PSI 26 Amp H4-145-175","description":"\u003cp\u003eUpgrade your compressor's performance with this heavy-duty 25 Amp air compressor 4 Port pressure switch. Built to handle high startup loads and eliminate common issues like burnt or melted contacts, this switch is a reliable choice for replacement or upgrade. It’s compatible with a wide range of air compressors and great replacement switch for Furnas, Square D, Sunny, Lefoo, and others.\u003c\/p\u003e\n\u003cp\u003ePre-set to activate at 140 PSI and shut off at 175 PSI, this unit also allows you to adjust the pressure range between 60 PSI and 200 PSI to suit your system’s needs. The integrated unloader valve helps maintain consistent startup performance by reducing tank pressure on restart. This version includes 4 Ports and a 1\/4\" compression inlet for the unloader line, along with a compression nut and ferrule for easy setup.  This allows you to add in additional accessories like pressure gauges.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with 115V, 230V AC, and DC power, this universal switch is an excellent solution for compressors that operate without magnetic starters or require a more durable control system.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e• Maximum Current Rating: 25 Amps\u003cbr\u003e• Voltage Compatibility: 115V, 230V, and DC Power\u003cbr\u003e• Four 1\/4\" Female Ports for Tank Pressure Inlet (Measurs 1\/2\" in diameter with a ruler)\u003cbr\u003e• 1 Single 1\/4\" Compression Inlet for Unloader Valve (Measures 1\/2\" in diameter with a ruler)\u003cbr\u003e• Comes with new Compression Nut and Ferrule\u003cbr\u003e• On and Off Lever on the Side\u003cbr\u003e• Factory Cut-in Pressure: 140 PSI (Adjustable)\u003cbr\u003e• Factory Cut-out Pressure: 175 PSI (Adjustable)\u003cbr\u003e• Adjustable Pressure Range: 60 PSI Minimum Adjustment to 200 PSI Maximum Adjustment\u003cbr\u003e• Certification Marks on Switch: CE, RU, cRUus\u003c\/p\u003e","brand":"Sunny","offers":[{"title":"Default Title","offer_id":12486484721730,"sku":"H4-145-175","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/h4-145-175_20comp.jpg?v=1723125315"},{"product_id":"single-port-145-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 145 - 175 PSI 16 Amp 69MB9LY","description":"\u003cp\u003eLEFOO 140-175 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a single 1\/4\" female NPT air inlet port. ( Note: NPT measures about 3\/4\" in diameter.)\u003c\/p\u003e\n\u003cp\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load-free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThe preset pressure of this switch is most commonly used on two stage compressors as long as the amperage is less than 20 amps on 120 volt or 12 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003c\/p\u003e\n\u003cp\u003eThis switch comes preset to turn the compressor on at 140 psi and shut off at 175 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Preset: 140-175 PSI\u003cbr\u003e• Minimum On: 50 PSI\u003cbr\u003e• Maximum Off Pressure: 175 PSI\u003cbr\u003e• Pressure Differential: 35-55 PSI\u003cbr\u003e• 1\/4\" Compression Unloader Valve Connection\u003cbr\u003e• 1\/4\" Female NPT Tank Connection\u003cbr\u003e• Max Amps: 20 Amps @ 120V \/ 12 Amp @ 240V \/ 9.6 Amp @ 3PH 240 Volt\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486461063234,"sku":"69MB9LY","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69mb9ly-switch-1-cs_7787c0e4-4bae-4120-b214-fd839306d84a.jpg?v=1689180653"},{"product_id":"single-port-95-125-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 16 Amp 69MB7LY","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eLEFOO 95-125 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D, and more. This switch is equipped with an unloader valve, an on\/off lever, and a single female NPT air inlet port. (Note: 1\/4\" NPT measures about 1\/2\" in diameter.)The unloader equipped with this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe preset pressure of this switch is most commonly used on two-stage compressors as long as the amperage is less than 20 amps on 120 volts or 12 amps on 240 volts, however, if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case, it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• PRESET 95-125 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MINIMUM ON: 35 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1\/4\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1\/4\" FEMALE NPT TANK CONNECTION.=\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MAX AMPS, 20 AMPS AT 120VOLT \/ 12 AMP AT 240 VOLT, AND 9.6 AMP AT 3PH 240 VOLT\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486581289026,"sku":"69MB7LY","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69mb9ly-switch-1-cs.jpg?v=1689180651"},{"product_id":"liquid-filled-0-5-000-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 5,000 PSI Pressure Gauge Center Back Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eOne brand new, top quality, liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis gauge reads at 0, 1000, 2000, 3000, 4000, and 5,000 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBar reading at 0, 50, 100, 150, 200, 250, 300, 350 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDial size: 2.5\"\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eConnection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan color=\"#ad001f\"\u003eCenter \u003cspan color=\"#8a0000\"\u003eb\u003c\/span\u003eack \u003cspan color=\"#8a0000\"\u003em\u003c\/span\u003e\u003c\/span\u003eount\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eStainless steel case and bezel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrass internals \u0026amp; connection (w\/ built in snubber)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003ePhosphor bronze bourdon tube\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eGlycerine filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDual scale: PSI and bar (x100=kPa)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAmbient temperature: 30 F to 160 F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486910378050,"sku":"SEC-202L-254R","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/202l-254r-front.jpg?v=1723122930"},{"product_id":"liquid-filled-0-3-000-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 3,000 PSI Center Back Mount Pressure Gauge PRO-202L-254P","description":"\u003cp\u003eTop quality liquid-filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use. This gauge is typically used on hydraulic and pneumatic systems as well as many commercial or industrial applications, not corrosive to brass and bronze.\u003c\/p\u003e\n\u003cp\u003eThis gauge reads at 0, 500, 1000, 1500, 2000, 2500, 3000 psi with line markings every 50 psi.\u003cbr\u003eBar reading at 0, 50, 100, 150, 200\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Dial size: 2.5\"\u003cbr\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003cbr\u003e• Center back mount\u003cbr\u003e• Stainless steel case and bezel\u003cbr\u003e• Brass internals \u0026amp; connection (w\/ built-in snubber)\u003cbr\u003e• Phosphor bronze bourdon tube\u003cbr\u003e• Glycerine filled\u003cbr\u003e• Accuracy: 3-2-3% per ANSI grade B\u003cbr\u003e• Dual scale: PSI and bar (x100=kPa)\u003cbr\u003e• Ambient temperature: 30 F to 160 F\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486654689346,"sku":"SEC-202L-254P","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-202l-254p_272__2.jpg?v=1723122699"},{"product_id":"liquid-filled-0-100-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 100 PSI Center Back Mount Pressure Gauge","description":"\u003cp\u003eLiquid-filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.\u003c\/p\u003e\n\u003cp\u003eThis gauge reads at 0, 20, 40, 60, 80, 100 psi with line markings every 2 psi.\u003cbr\u003eBar reading at 0-7.\u003cbr\u003e \u003cbr\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Dial size: 2.5\"\u003cbr\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003cbr\u003e• Center back mount\u003cbr\u003e• Stainless steel case and bezel\u003cbr\u003e• Brass internals \u0026amp; connection (w\/ built in snubber)\u003cbr\u003e• Phosphor bronze bourdon tube\u003cbr\u003e• Glycerine filled\u003cbr\u003e• Accuracy: 3-2-3% per ANSI grade B\u003cbr\u003e• Dual scale: PSI and bar (x100=kPa)\u003cbr\u003e• Ambient temperature: 30 F to 160 F\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486797459522,"sku":"SEC-202L-254E","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/202l-254e-front.jpg?v=1723122884"},{"product_id":"4-port-3-phase-140-175-psi-pressure-switch","title":"4 Port Pressure Switch 140 - 175 PSI 16 Amp \nLF18-H4-140-175","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e                Brand new heavy duty 3 phase 140-175 PSI air compressor, pressure switch, control valve with a four port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D, Condor and more. This switch is equipped with an unloader valve, on \/ off pressure control button, and a four port mounting manifold.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single, two, or three stage compressor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-PRESET PRESSURE: 140-175 PSI\u003cbr\u003e-MINIMUM ON: 80 PSI\u003cbr\u003e-MAXIMUM OFF PRESSURE: 175 PSI\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-¼\" FEMALE NPT TANK CONNECTION x4\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-Works With 208, 220, 230, 240, 440 Volt Applications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-This switch is rated at 16 amp on 440 volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486744670274,"sku":"LF18-H4-140-175","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf18-h4-140-175-1-cs.jpg?v=1677196974"},{"product_id":"single-port-26-amp-heavy-duty-140-175-psi-pressure-switch","title":"1 Port Pressure Switch 140 - 175 PSI 26 Amp LF10A-H1-140-175","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new  heavy duty, 26 Amp LEFOO 140-175 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a single port mounting manifold. This is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26 Amp contacts to provide a longer lasting switch in demanding applications.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single stage or two stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003cbr\u003e\u003cbr\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePreset 140-175 PSI\u003cbr\u003eMinimum On: 80 PSI\u003cbr\u003eMaximum Off Pressure: 175 PSI\u003cbr\u003ePressure Differential: 35-55 PSI\u003cbr\u003e1\/4\" Compression Unloader Valve Connection\u003cbr\u003e1\/4\" Female NPT Tank Connection\u003cbr\u003eMax Amps: 26 Amps at 120 Volt \/ 26 Amp at 240 Volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487054196802,"sku":"LF10A-H1-140-175","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10a-h1-140-175-11-cs.jpg?v=1677262125"},{"product_id":"4-port-26-amp-heavy-duty-140-175-psi-pressure-switch","title":"4 Port Pressure Switch 26 Amp 140 - 175 PSI Lefoo LF-10A-H4","description":"\u003cp\u003eHeavy duty, 26 Amp LEFOO 140-175 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, a four port mounting manifold, and an on\/off lever. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy duty 26 Amp contacts to provide a longer lasting switch in demanding applications.\u003c\/p\u003e\n\u003cp\u003eThe four port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThis switch can be used on a single stage or two stage compressor as long as the amperage is less than 26 amps on 120 volt or 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• PRESET 140-175 PSI\u003cbr\u003e• MINIMUM ON: 50 PSI\u003cbr\u003e• MAXIMUM OFF PRESSURE: 175 PSI\u003cbr\u003e• PRESSURE DIFFERENTIAL: 35-55 PSI\u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1\/4\" FEMALE NTP PORTS.\u003cbr\u003e• MAX AMPS, 26 AMPS AT 120VOLT \/ 26 AMP AT 240 VOLT\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003cbr\u003e• 4-3\/4\" Long (Farthest Point)\u003cbr\u003e• 2-5\/8\" Wide (Farthest Point)\u003cbr\u003e• 3-3\/4\" (Bottom of Manifold to Top of Lid)\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487318044738,"sku":"LF-10A-H4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf-10a-h4-1-cs.jpg?v=1677001594"},{"product_id":"single-port-26-amp-heavy-duty-95-125-psi-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 26 Amp LF10A-L1-95-125","description":"\u003cp\u003eHeavy duty, 26 Amp LEFOO 95-125 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D, and more. This switch is equipped with an unloader valve, on\/off lever, and a single port mounting manifold. This is similar to the regular single port pressure switch, but this switch is equipped with heavy-duty 26Amp contacts to provide a longer-lasting switch in demanding applications.\u003cbr\u003e\u003cbr\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load-free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThis switch can be used on a single-stage or two-stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volts, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003c\/p\u003e\n\u003cp\u003eThis switch comes pre-set to turn the compressor on at 95 PSI and shut off at 125 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• PRESET 95-125 PSI\u003cbr\u003e• MINIMUM ON: 35 PSI\u003cbr\u003e• MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e• PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION \u003cbr\u003e• MAX AMPS, 26 AMPS AT 120VOLT \/ 20 AMP AT 240 VOLT\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486448742466,"sku":"LF10A-L1-95-125","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10a-l1-95-125-1-cs.jpg?v=1677196975"},{"product_id":"import-style-4-port-air-compressor-pressure-switch-95-125-psi","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp Lefoo  LF19-L4","description":"\u003cp\u003eImport style 95-125 PSI air compressor, pressure switch, control valve with a four-port connection manifold. The switch listed is a universal replacement pressure switch that replaces import syle, Condor brand and more. This switch is equipped with an unloader valve, on\/off pressure control button, and a four-port mounting manifold.\u003c\/p\u003e\n\u003cp\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly. This switch can be used on a single, two, or three-stage compressor.\u003c\/p\u003e\n\u003cp\u003eThis switch comes preset to turn the compressor on at 95 PSI and shut off at 125 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Preset Cut in Pressure: 95 PSI\u003cbr\u003e• Preset Cut Out Pressure: 125 PSI\u003cbr\u003e• Adjustable Pressure Setting\u003cbr\u003e• Differential: 28-55\u003cbr\u003e• Air Inlet: Four 1\/4\" Female NPT (If you need Male Threads Just add a pipe nipple)\u003cbr\u003e• Unloader Valve: 1\/4\" Push Lock (Unloader is located on the bottom of the switch)\u003cbr\u003e• There are 6 Wire Connections: (Two line in connections with a ground, and two motor connections with a ground.)\u003cbr\u003e• 26 amps @ 220-240 Volts\u003cbr\u003e• 26 amps @ 110-120 Volts\u003cbr\u003e• Minimum On: 30 PSI\u003cbr\u003e• Maximum Off: 155 PSI\u003cbr\u003e \u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486563561538,"sku":"LF19-L4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf19-l4-cs-1.jpg?v=1728515600"},{"product_id":"4-port-26-amp-95-125-psi-heavy-duty-pressure-switch","title":"4 Port Pressure Switch 26 Amp 95-125 PSI \nLF-10A-L4","description":"\u003cp style=\"text-align: center;\"\u003eBrand new heavy-duty, 26 Amp LEFOO 95-125 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D and more. This switch is equipped with an unloader valve, on\/off lever, and a four-port mounting manifold. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy-duty 26Amp contacts to provide a longer-lasting switch in demanding applications. The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch.\u003cbr\u003e\u003cbr\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly. This switch can be used on a single-stage or two-stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes pre set to turn the compressor on at 95 psi and shut off at 125 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e-PRESET 95-125 PSI\u003cbr\u003e-MINIMUM ON: 35 PSI\u003cbr\u003e-MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e-PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e-¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e-¼\" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1\/4\" FEMALE NTP PORTS.\u003cbr\u003e-MAX AMPS, 26 AMPS AT 120VOLT \/ 20 AMP AT 240 VOLT\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486787792962,"sku":"LF-10A-L4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf-10a-l4-1-cs.jpg?v=1677262125"},{"product_id":"single-port-145-175-psi-metal-housing-pressure-switch","title":"1 Port Pressure Switch 145 - 175 PSI 26 Amp Lefoo LF17-H1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new, heavy duty, 145-175 PSI pressure switch for 2-Stage air compressors. Most 60-80 gallon compressors come with a light duty pressure switch and do not have a magnetic starter. This usually leads to the contacts in your switch burning up after little use. This switch is designed to handle 18-22 Amp motors without a magnetic starter. This switch will work with magnetic starters if you have one currently or if you add one later. This switch does not feature an on\/off lever so the compressor has to be turned off at the breaker to shut power off to the motor.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e Preset ON\/OFF Pressure: 145-175 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" FEMALE NPT TANK CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" COMPRESSION UNLOADER VALVE\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486891208770,"sku":"LF17-H1","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf17-h1_20comp.jpg?v=1723128700"},{"product_id":"liquid-filled-0-1-000-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 1,000 PSI Pressure Gauge Center Back Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eOne brand new, top quality, liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis gauge reads at 0, 200, 400, 600, 800, and 1,000 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBar reading at 0, 10, 20, 30, 40, 50, 60, 70 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDial size: 2.5\"\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eConnection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan color=\"#ad001f\"\u003eCenter \u003cspan color=\"#8a0000\"\u003eb\u003c\/span\u003eack \u003cspan color=\"#8a0000\"\u003em\u003c\/span\u003e\u003c\/span\u003eount\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eStainless steel case and bezel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrass internals \u0026amp; connection (w\/ built in snubber)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003ePhosphor bronze bourdon tube\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eGlycerine filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDual scale: PSI and bar (x100=kPa)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAmbient temperature: 30 F to 160 F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486714687554,"sku":"SEC-202L-254M","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-202l-254m_028__2.jpg?v=1723122931"},{"product_id":"heavy-duty-25-amp-140-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 145 - 175 PSI 26 Amp H1-145-175","description":"\u003cp\u003eUpgrade your compressor's performance with this heavy-duty 25 Amp air compressor pressure switch. Built to handle high startup loads and eliminate common issues like burnt or melted contacts, this switch is a reliable choice for replacement or upgrade. It’s compatible with a wide range of air compressors and great replacement switch for Furnas, Square D, Sunny, Lefoo, and others.\u003c\/p\u003e\n\u003cp\u003ePre-set to activate at 140 PSI and shut off at 175 PSI, this unit also allows you to adjust the pressure range between 60 PSI and 200 PSI to suit your system’s needs. The integrated unloader valve helps maintain consistent startup performance by reducing tank pressure on restart. This version includes a single tank port and a 1\/4\" compression inlet for the unloader line, along with a compression nut and ferrule for easy setup.\u003c\/p\u003e\n\u003cp\u003eDesigned for use with 115V, 230V AC, and DC power, this universal switch is an excellent solution for compressors that operate without magnetic starters or require a more durable control system.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e• Maximum Current Rating: 25 Amps\u003cbr\u003e• Voltage Compatibility: 115V, 230V, and DC Power\u003cbr\u003e• 1 Single 1\/4\" Female Port for Tank Pressure Inlet\u003cbr\u003e• 1 Single 1\/4\" Compression Inlet for Unloader Valve\u003cbr\u003e• Comes with new Compression Nut and Ferrule\u003cbr\u003e• On and Off Lever on the Side\u003cbr\u003e• Factory Cut-in Pressure: 140 PSI (Adjustable)\u003cbr\u003e• Factory Cut-out Pressure: 175 PSI (Adjustable)\u003cbr\u003e• Adjustable Pressure Range: 60 PSI Minimum Adjustment to 200 PSI Maximum Adjustment\u003cbr\u003e• Certification Marks on Switch: CE, RU, cRUus\u003c\/p\u003e","brand":"Sunny","offers":[{"title":"Default Title","offer_id":12486586105922,"sku":"H1-145-175","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/h1-145-175_201.jpg?v=1744296346"},{"product_id":"4-port-hubbell-69jf9ly2c-140-175-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 140 - 175 PSI 16 Amp Hubbell Furnas 69JF9LY2C","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 4-port Hubbell \/ Furnas 140-175 PSI air compressor pressure switch control valve with four 1\/4” female NPT air inlet connection ports. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and four 1\/4” female NPT air inlet ports. ( Note: 1\/4” NPT measures about 1\/2” in diameter.) The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand: Hubbell (formerly Furnas)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePart Number: 69JF9LY2C\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eManual On\/Off Lever on the side of the switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESET 140-175 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESSURE DIFFERENTIAL: 30-40 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eFOUR PORT 1\/4\" FEMALE NPT TANK CONNECTIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMADE IN THE USA\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hubbell","offers":[{"title":"Default Title","offer_id":12486648266818,"sku":"69JF9LY2C","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69jf9ly2c_201.jpg?v=1771433724"},{"product_id":"4-port-25-amp-95-125-psi-heavy-duty-air-compressor-pressure-switch","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp L495-125","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis listing is for a brand new 25 Amp heavy duty air compressor switch. If the switches you have been using are burning out and melting contacts, this is a great high quality heavy duty replacement switch! This switch is rated at 25 Amps at 115V, 230V, and 12V DC power. The switch is set to turn on at 95 PSI and turn off at 125 PSI. The pressure settings are adjustable 30-40+- PSI. This switch comes equiped with and on\/off switch and also an unloader valve which can or cannot be used depending on what your compressor calls for. This is a universal switch commonly used as a replacement \/ upgrade with Furnas, Square D, Sunny, Lefoo, and many more compressors! This will work as long as the pressure settings are correct or close enough to adjust the switch to the exact pressure you use. This switch requires one 1\/4\" air inlet from the tank. The manifold on this switch features four 1\/4\" inlet \/ outlets. We also have single port pressure switches available in our store.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e(THIS SWITCH IS FOR COMPRESSORS WITH HIGH AMPS OR WITHOUT A STARTER ALSO FOR SMALLER COMPRESSORS IF YOU WOULD JUST LIKE A GREAT HEAVY DUTY LONG LASTING SWITCH.)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e- THIS SWITCH HAS FOUR ¼\" NPT FEMALE PORTS. ONE IS ALWAYS USED AS A TANK PRESSURE AIR INLET AND THE OTHER THREE CAN BE USED FOR A GAUGE, RELIEF VALVE, AN AIR OUTLET, OR CAN BE PLUGGED IF THEY ARE NOT NEEDED. \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-1 SINGLE 1\/4\" COMPRESSION INLET FOR UNLOADER VAVLE.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e(COMES WITH NEW COMPRESSION NUT AND FERREL)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e25 AMP POWER HANDLING AT 115V, 230 VOLT AND DC POWER.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eON AND OFF LEVER ON THE SIDE.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCUT IN PRESSURE: 95 PSI, CUT OUT PRESSURE 125 PSI, ALSO ADJUSTABLE.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Sunny","offers":[{"title":"Default Title","offer_id":12486552911938,"sku":"L495-125","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/l495-125_20comp.jpg?v=1723127999"},{"product_id":"hubbell-69jf7ly-95-125-psi-single-port-air-compressor-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 16 Amp Hubbell Furnas 69JF7LY","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new Hubbell \/ Furnas 95-125 PSI air compressor pressure switch control valve with a single 1\/4” female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a single 1\/4” female NPT air inlet port. ( Note: 1\/4” NPT measures about 1\/2” in diameter.) The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand: Hubbell (formerly Furnas)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePart Number: 69JF7LY\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESET 95-125 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eEquipped With Manual On \/ Off Lever On The Switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESSURE DIFFERENTIAL: 30-40 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" FEMALE NPT TANK CONNECTION.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMADE IN THE USA\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hubbell","offers":[{"title":"Default Title","offer_id":12486718750786,"sku":"69JF7LY","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69jf7ly_874__1.jpg?v=1723127964"},{"product_id":"4-port-25-amp-105-135-psi-heavy-duty-amp-pressure-switch","title":"4 Port Pressure Switch 105 - 135 PSI 26 Amp L4M-105-135","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e             Brand new  heavy duty, 25 Amp Sunny 105-135 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, a On \/ Off switch, and a four port mounting manifold. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy duty 25 Amp contacts to provide a longer lasting switch in demanding applications.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe four port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis switch can be used on a single stage or two stage compressor as long as the amperage is less than 25 amps on volt 115-230 on a single phase or on a three phase 230-575 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes pre set to turn the compressor on at 105 PSI and shut off at 135 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESET 105-135 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-MINIMUM ON: 60 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-MAXIMUM OFF PRESSURE: 200 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESSURE DIFFERENTIAL: 28-40 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-¼\" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1\/4\" FEMALE NTP PORTS.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-MAX AMPS, 25 AMPS AT 115-230 VOLT \/ 25 AMP AT 230-575 VOLT\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eNo Power Switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e4-3\/4\" Long (Farthest Point)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2-5\/8\" Wide (Farthest Point)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e3-3\/4\" (Bottom of Manifold to Top of Lid)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Sunny","offers":[{"title":"Default Title","offer_id":12486467059778,"sku":"L4M-105-135","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/l4m-105-135-cs-1-1.jpg?v=1741974405"},{"product_id":"single-port-import-style-140-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 140 - 175 PSI 16 Amp LF19-H1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e                Brand new Import Style 140-175 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces import style, Condor brand and more. This switch is equipped with an unloader valve, on \/ off pressure control button, and a single port mounting manifold.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single, two, or three stage compressor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003ePreset Cut in Pressure: 140 PSI\u003cbr\u003ePreset Cut Out Pressure: 175 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAdjustable Pressure Setting\u003cbr\u003eDifferential: 35-55\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAir Inlet: Single 1\/4\" Female NPT (If you need Male Threads Just add a pipe nipple)\u003cbr\u003eUnloader Valve: 1\/4\" Push Lock (Unloader is located on the bottom of the switch)\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eThere are 6 Wire Connections: (Two line in connections with a ground, and two motor connections with a ground.)\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e26 amps @ 220-240 Volts\u003cbr\u003e26 amps @ 110-120 Volts\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cbr\u003eMinimum On: 70 PSI\u003cbr\u003eMaximum Off: 200 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486911197250,"sku":"LF19-H1","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lefoo-lf19-h1-front-image.jpg?v=1728515598"},{"product_id":"single-port-95-125-psi-metal-housing-pressure-switch","title":"1 Port Pressure Switch 105 - 135 PSI 26 Amp LF17-L1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis listing is for a brand new heavy duty 105-135 PSI pressure switch for single stage air compressors. Most 60-80 gallon single stage compressors come with a light duty pressure switch that can burn out the contacts after only a little use. This switch is designed to handle 18-22 Amp electric motors. This switch is made without an on\/off lever so that you can shut the power off to the motor using the breaker.\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e•  Preset ON\/OFF pressure: 105-135 PSI\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION \u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486740246594,"sku":"LF17-L1","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf17-l1-1-cs.jpg?v=1677196974"},{"product_id":"single-port-hubbell-69jf9ly-140-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 140 - 175 PSI 16 Amp Hubbell Furnas 69JF9LY","description":"\u003cp\u003e\u003cstrong\u003eHubbell\/Furnas 140-175 PSI air compressor pressure switch control valve with a single 1\/4” female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D, and more. This switch is equipped with an unloader valve, an on\/off lever, and a single 1\/4” female NPT air inlet port. ( Note: 1\/4” NPT measures about 1\/2” in diameter.) The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor can start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e• Brand: Hubbell (formerly Furnas)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Part Number: 69JF9LY\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Manual On\/Off Lever on the side of the switch\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Preset: 140-175 psi\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Pressure Differential: 30-40 psi\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/4\" Compression Unloader Valve Connection\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/4\" Female NPT Tank Connection\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Made in the USA\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hubbell","offers":[{"title":"Default Title","offer_id":12487147126850,"sku":"69JF9LY","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69jf9ly_515__1.jpg?v=1723127998"},{"product_id":"liquid-filled-0-10-000-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0-10,000 PSI Center Back Mount Pressure Gauge","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new top quality liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge is typically used on hydraulic and pneumatic systems as well as many commercial or industrial applications, not corrosive to brass and bronze.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis gauge reads at 0, 2000, 4000, 6000, 8000, 10000psi with line markings every 200 psi.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBar reading at 0, 100, 200, 300, 400, 500, 600, 700\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Dial size: 2.5\"\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Center back mount\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Stainless steel case and bezel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Brass internals \u0026amp; connection (w\/ built in snubber)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Phosphor bronze bourdon tube\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Glycerine filled\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Accuracy: 3-2-3% per ANSI grade B\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Dual scale: PSI and bar (x100=kPa)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ambient temperature: 30 F to 160 F\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486717276226,"sku":"SEC-202L-254U","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/202l-254u-top.jpg?v=1723122906"},{"product_id":"single-port-25-amp-95-125-psi-heavy-duty-air-compressor-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 26 Amp L195-125","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eThis listing is for a 25 Amp heavy-duty air compressor switch. If the switches you have been using are burning out and melting contacts, this is a great high-quality heavy-duty replacement switch! This switch is rated at 25 Amps at 115V, 230V, and 12V DC power. The switch is set to turn on at 95 PSI and turn off at 125 PSI. The pressure settings are adjustable 30-40+- PSI. This switch comes equipped with an on\/off switch and also an unloader valve which can or cannot be used depending on what your compressor calls for. This is a universal switch commonly used as a replacement \/ upgrade with Furnas, Square D, Sunny, Lefoo, and many more compressors! This will work as long as the pressure settings are correct or close enough to adjust the switch to the exact pressure you use. This switch requires one 1\/4\" air inlet from the tank. We also have 4 port pressure switches available in our store.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e(This switch is for compressors with high amps or use without a magnetic starter.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• 1 Single 1\/4\" Female Port for the Tank Pressure Inlet\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1 Single 1\/4\" Compression Inlet for the Unloader Valve\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Comes with New Compression Nut and Ferrule\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 25 Amp Power Handling @ 115V, 230 Volt and DC Power\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• On and Off Lever on the Side\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Cut in Pressure: 95 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Cut-out Pressure: 125 PSI (Adjustable)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Sunny","offers":[{"title":"Default Title","offer_id":12486832586818,"sku":"L195-125","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/l195-125-cs-4.jpg?v=1743206940"},{"product_id":"liquid-filled-0-200-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0-200 PSI Center Back Mount Pressure Gauge","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new top quality liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis gauge reads at 0, 20, 40, 60, 80, 100, 120, 140, 160, 200 psi with line markings every 2 psi.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBar reading at 0, 2, 4, 6, 8, 10, 11 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDial size: 2.5\"\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eConnection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan color=\"#ad001f\"\u003eC\u003c\/span\u003eenter \u003cspan color=\"#8a0000\"\u003eb\u003c\/span\u003eack \u003cspan color=\"#8a0000\"\u003em\u003c\/span\u003eount\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eStainless steel case and bezel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrass internals \u0026amp; connection (w\/ built in snubber)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003ePhosphor bronze bourdon tube\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eGlycerine filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDual scale: PSI and bar (x100=kPa)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAmbient temperature: 30 F to 160 F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486933938242,"sku":"SEC-202L-254G","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-202l-254g_015__2.jpg?v=1723122906"},{"product_id":"liquid-filled-0-300-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 300 PSI Center Back Mount Pressure Gauge SEC-202L-254H","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eLiquid-filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eThis gauge reads at 0, 50, 100, 150, 200, 250, and 300 psi.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBar reading at 0, 5, 10, 15, 20\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• Dial size: 2.5\"\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Center back mount\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Stainless steel case and bezel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Brass internals \u0026amp; connection (w\/ built in snubber)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Phosphor bronze bourdon tube\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Glycerine filled\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Accuracy: 3-2-3% per ANSI grade B\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Dual scale: PSI and bar (x100=kPa)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ambient temperature: 30 F to 160 F\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486813745218,"sku":"SEC-202L-254H","price":16.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-202l-254h_573__2.jpg?v=1723122358"},{"product_id":"4-port-hubbell-69jf7ly2c-95-125-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 95 - 125 PSI 16 Amp Hubbell Furnas 69JF7LY2C","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 4-port Hubbell \/ Furnas 95-125 PSI air compressor pressure switch control valve with four 1\/4” female NPT air inlet connection ports. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a manifold with four 1\/4” female NPT air inlet ports. ( Note: 1\/4” NPT measures about 1\/2” in diameter.) The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand: Hubbell (formerly Furnas)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePart Number: 69JF7LY2C\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESET 95-125 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eEquipped With Manual On \/ Off Lever On The Switch\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e-PRESSURE DIFFERENTIAL: 30-40 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eFOUR PORT 1\/4\" FEMALE NPT TANK CONNECTIONS.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMADE IN THE USA\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hubbell","offers":[{"title":"Default Title","offer_id":12486817906754,"sku":"69JF7LY2C","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69jf7ly2c-cs-1.jpg?v=1745354452"},{"product_id":"1-8-npt-0-60-psi-air-compressor-hydraulic-pressure-gauge-center-back-mount-with-1-5-face","title":"1.5\" Face 1\/8\" NPT 0-60 PSI Pressure Gauge Center Back Mount 102D-158D","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial 0-60 PSI air pressure gauge with a 1.5\" face. This gauge has 1\/8\" NPT male threads which come out the back of the gauge. This gauge is a top quality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0,10,20,30,40,50,60 PSI.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0-60 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1.5\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/8\" male NPT threads, which measure about 3\/8\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486684639298,"sku":"1.5B60","price":4.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/15b60_602__2.jpg?v=1723128699"},{"product_id":"liquid-filled-0-160-psi-center-back-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 160 PSI Center Back Mount Pressure Gauge","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new top quality liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis gauge reads at 0, 20, 40, 60, 80, 100, 120, 140, and 160 psi with line markings every 2 psi.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBar reading at 0, 2, 4, 6, 8, 10, 11 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Dial size: 2.5\"\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Center back mount\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Stainless steel case and bezel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Brass internals \u0026amp; connection (w\/ built in snubber)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Phosphor bronze bourdon tube\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Glycerine filled\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Accuracy: 3-2-3% per ANSI grade B\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Dual scale: PSI and bar (x100=kPa)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ambient temperature: 30 F to 160 F\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487096041538,"sku":"SEC-202L-254F","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-202l-254f_965__2_b3e95b06-e98e-455c-9f45-71b7e5946082.jpg?v=1723122918"},{"product_id":"1-4-npt-0-160-psi-air-pressure-gauge-lower-side-mount","title":"1\/4\" NPT 0 - 160 PSI Pressure Gauge Lower Side Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 0-160 PSI air pressure gauge with a 2\" face. This gauge has solid brass 1\/4\" NPT male threads which come out the bottom side of the gauge. This gauge is top quality, made with a black steel case and a chrome front bezel. This gauge has PSI number markings at 0, 20, 40, 60, 80, 100, 120, 140, and 160 PSI. BAR ratings at 0, 2, 4, 6, 8, 10, and 11.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0-160 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486594428994,"sku":"101D-204F","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/101d-204f_317__1.jpg?v=1723122484"},{"product_id":"1-8-npt-0-30-psi-air-compressor-hydraulic-pressure-gauge-center-back-mount-with-1-5-face","title":"1\/8\" NPT 0-30 PSI Pressure Gauge Center Back Mount With 1.5\" Face 102D-158C","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eIndustrial 0-30 PSI air pressure gauge with a 1.5\" face. This gauge has 1\/8\" NPT male threads that come out of the back of the gauge. This gauge is a top-quality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0,5,10,15,20,25,30 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• 0-30 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1.5\" Face\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eNote:  1\/8\" male NPT threads, which measure about 3\/8\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486539542594,"sku":"1.5B30-Gauge","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/15b30main1.jpg?v=1737135976"},{"product_id":"1-4-npt-30-0-30-psi-vacuum-air-pressure-gauge-center-back-mount-with-2-face","title":"2\" Face 1\/4\" NPT -30-0-30 PSI Vacuum Pressure Gauge Center Back Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial grade vacuum pressure \/ PSI gauge. This gauge measures vacuum pressure from 0 to -30 and air pressure from 0 to 30 PSI. This air pressure gauge is solid steel construction with a chrome front bezel and a 2\" face. This gauge has 1\/4\" NPT male solid brass threads which come out the back of the gauge. This gauge has number markings at -30, -20, -10, 0, 10, 20 and 30 PSI  as well as BAR markings with individual hash marks in between for accurate measurement.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Vacuum \/ PSI Pressure Gauge\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• -30 to 0 to 30 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 2\" Face\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Solid Steel Construction\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Chrome Front Bezel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Solid Brass 1\/4\" Male NPT Threads\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• *1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486473252930,"sku":"102D-204CC","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/102d-204cc_909__3.jpg?v=1723128720"},{"product_id":"1-8-npt-0-200-psi-air-compressor-hydraulic-pressure-gauge-lower-side-mount-with-1-5-face","title":"1.5\" Face  1\/8\" NPT Pressure Gauge 0-200 PSI Side Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial 0-200 PSI air pressure gauge with a 1.5\" face. This gauge has 1\/8\" NPT male threads which come out the side of the gauge. This gauge is a top quality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0, 40, 80, 120, 160, 200 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0-200 PSI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1.5\" Face\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/8\" male NPT threads, which measure about 3\/8\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487109673026,"sku":"1.5S200","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/1.5s200-cs.jpg?v=1723122359"},{"product_id":"1-4-male-0-60-psi-back-mount-air-compressor-air-pressure-gauge","title":"2\" Face 1\/4\" Male 0-60 PSI Pressure Gauge Back Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial 0-60 PSI air pressure gauge with a 2\" face. This gauge has 1\/4\" NPT male threads which come out the back of the gauge. This gauge is a top quality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0, 10, 20, 30, 40, 50, and 60 PSI. There are also little marks every 5 PSI in between the number markings.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0-60 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" Male NPT threads which measure about 1\/2\" outside diameter\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Black Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eChrome Front Bezel\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486669959234,"sku":"2B60","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/2b60-front-gauge.jpg?v=1762448768"},{"product_id":"liquid-filled-0-200-psi-air-pressure-gauge-center-back-with-2-5-face","title":"2.5\" Face Liquid Filled 0-200 PSI Pressure Gauge Center Back","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eOne brand new, top quality, liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis gauge reads at: 0, 40, 80, 120, 160, and 200 PSI \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ewith tac marks every 5 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBAR readings at 2,4,6,8,10,12, and 14\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eDial Size: 2\" \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eCenter Bottom Mount\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eConnection Size: 1\/4\" Male NPT\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eStainless Steel Case \u0026amp; Bezel\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrass Connection and Internals with built in Snubber\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePhosphor Bronze Bourdon Tube\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eGlycerine Filled\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eDual Scale: PSI \/ BAR (x100=kPa)\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAmbient Temperature: 30°F to 160°F\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487290290242,"sku":"202L-204G","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/202l-204g-new.jpg?v=1723128599"},{"product_id":"liquid-filled-0-100-psi-lower-side-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 100 PSI Lower Side Mount Pressure Gauge","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new top quality liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis gauge reads at 0, 20, 40, 60, 80, 100 psi with line markings every 2 psi.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBar reading at 0-7.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan face=\"Times\" size=\"5\"\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDial size: 2.5\"\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eLower mount \/ Side mount\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eConnection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eStainless steel case and bezel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrass internals \u0026amp; connection (w\/ built in snubber)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003ePhosphor bronze bourdon tube\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eGlycerine filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDual scale: PSI and bar (x100=kPa)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAmbient temperature: 30 F to 160 F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487228358722,"sku":"SEC-201L-254E","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/201l-254enew2.jpg?v=1723127491"},{"product_id":"1-4-npt-0-60-psi-air-pressure-gauge-lower-side-mount-with-2-face","title":"2\" Face 1\/4\" NPT 0 - 60 PSI Pressure Gauge Lower Side Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial 0-60 PSI air pressure gauge with a 2\" face. This gauge has 1\/4\" NPT male threads which come out the bottom side of the gauge. This gauge is top quality, made with a black steel case and a chrome front bezel. This gauge has number markings at 0,10,20,30,40,50,60 PSI.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0-60 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486548553794,"sku":"2S60-Gauge","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/2s60-gauge_201_20generic.jpg?v=1723128736"},{"product_id":"1-4-npt-0-to-30-psi-vacuum-air-pressure-gauge-center-back-mount-with-2-face","title":"2\" Face 1\/4\" NPT 0 - -30 PSI Air Vacuum Pressure Gauge Center Back Mount 102D-204A","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial grade vacuum pressure \/ PSI gauge. This gauge measures vacuum pressure from 0 to -30 PSI. This air pressure gauge is solid steel construction with a chrome front bezel and a 2\" face. This gauge has 1\/4\" NPT male solid brass threads which come out the back of the gauge. This gauge has number markings at 0, -5, -10, -15, -20, -25, and -30 PSI  as well as BAR markings with individual hash marks in between for accurate measurement.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eVacuum \/ PSI Pressure Gauge\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0 to -30 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eChrome Front Bezel\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Brass 1\/4\" Male NPT Threads\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e*1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486556123202,"sku":"102D-204A","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/102d-204a-new.jpg?v=1723128366"},{"product_id":"1-8-npt-0-to-30-psi-vacuum-air-pressure-gauge-center-back-mount-with-1-5-face","title":"1.5\" Face 1\/8\" NPT 0 - -30 PSI Air Vacuum Pressure Gauge Center Back Mount 102D-158A","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e   Brand new industrial grade vacuum pressure \/ PSI gauge. This gauge measures vacuum pressure from 0 to -30 PSI. This air pressure gauge is solid steel construction with a chrome front bezel and a 1.5\" face. This gauge has 1\/8\" NPT male solid brass threads which come out the back of the gauge. This gauge has number markings at 0, -5, -10, -15, -20, -25, and -30 PSI  as well as BAR markings with individual hash marks in between for accurate measurement.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eVacuum \/ PSI Pressure Gauge\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0 to -30 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1.5\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eChrome Front Bezel\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Brass 1\/8\" Male NPT Threads\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e* 1\/8\" male NPT threads, which measure about 3\/8\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486621495362,"sku":"102D-158A","price":4.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/102d-158a_420__2.jpg?v=1723128699"},{"product_id":"1-8-npt-0-300-air-pressure-gauge-center-back-mount-with-1-5-face","title":"1\/8\" NPT 0-300 Air Pressure Gauge Center Back Mount with 1.5\" Face","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eThis listing is for one new industrial 0-300 PSI air pressure gauge with a 1.5\" face. This gauge has 1\/8\" NPT male threads which come out the back of the gauge. This gauge is a top quality gauge made with a black steel case and a chrome front bezel. This gauge has number markings at 0, 50, 100, 150, 200, 250, 300 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• 0-300 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1.5\" face\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• This 1\/8\" male NPT threads, which measure about 3\/8\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487167311938,"sku":"1.5B300","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/1.5b300-1-logo.jpg?v=1723128274"},{"product_id":"1-8-npt-0-200-psi-air-pressure-gauge-lower-side-mount-with-2-face","title":"2\" Face 1\/8\" NPT 0-200 PSI Pressure Gauge Lower Side Mount","description":"\u003cp data-start=\"0\" data-end=\"72\"\u003e\u003cstrong data-start=\"0\" data-end=\"72\"\u003e1\/8\" NPT Air Compressor Lower Mount Pressure Gauge 0-200 PSI Side Mount 2\" Face\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"74\" data-end=\"800\"\u003eThe Industrial 0–200 PSI Air Pressure Gauge accurately monitors air pressure in compressors, pneumatic systems, and industrial equipment. Built with a durable black steel case and chrome front bezel, this gauge is designed to handle tough environments while delivering clear, easy-to-read measurements. The 2\" face features bold number markings at 0, 40, 80, 120, 160, and 200 PSI, so you can quickly check pressure at a glance. With a lower side 1\/8\" NPT male thread connection, this gauge installs easily into a wide range of air systems, making it a reliable and practical choice for shops, garages, and industrial applications. Dependable, rugged, and precise—this gauge keeps you in control.\u003c\/p\u003e\n\u003cp data-start=\"802\" data-end=\"832\"\u003e\u003cstrong data-start=\"802\" data-end=\"832\"\u003eFeatures and Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"835\" data-end=\"862\"\u003e• Pressure Range: 0–200 PSI\u003cbr\u003e• 2\" Easy-To-Read Face\u003cbr\u003e• Lower Side Mount\u003cbr\u003e• 1\/8\" NPT Male Threads (Approx. 3\/8\" OD)\u003cbr\u003e• Black Steel Case with Chrome Bezel\u003cbr\u003e• Clear PSI Markings at 0, 40, 80, 120, 160, 200\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487316504642,"sku":"101D-208G","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/101d-208g-cs-1.jpg?v=1769117416"},{"product_id":"liquid-filled-0-10-000-psi-lower-side-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0 - 10,000 PSI Lower Side Mount Pressure Gauge","description":"\u003cp\u003eLiquid-filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003cbr\u003e\u003cbr\u003eThis gauge reads at 0, 2000, 4000, 6000, 8000, and 10,000 PSI.\u003cbr\u003eBar reading at 0, 100, 200, 300, 400, 500, 600, 700\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e• Dial size: 2.5\"\u003cbr\u003e• Lower mount \/ Side mount\u003cbr\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003cbr\u003e• Stainless steel case and bezel\u003cbr\u003e• Brass internals \u0026amp; connection (w\/ built in snubber)\u003cbr\u003e• Phosphor bronze bourdon tube\u003cbr\u003e• Glycerine filled\u003cbr\u003e• Accuracy: 3-2-3% per ANSI grade B\u003cbr\u003e• Dual scale: PSI and bar (x100=kPa)\u003cbr\u003e• Ambient temperature: 30 F to 160 F\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486719569986,"sku":"SEC-201L-254U","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-201l-254u_302__2.jpg?v=1723127358"},{"product_id":"liquid-filled-0-300-psi-lower-side-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0-300 PSI Lower Side Mount Pressure Gauge","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new top quality liquid filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the  movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis gauge reads at 0, 50, 100, 150, 200, 250, 300 psi with line markings every 5 psi.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBar reading at 0, 5, 10, 15, 20\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDial size: 2.5\"\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eLower mount \/ Side mount\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eConnection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eStainless steel case and bezel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrass internals \u0026amp; connection (w\/ built in snubber)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003ePhosphor bronze bourdon tube\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eGlycerine filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAccuracy: 3-2-3% per ANSI grade B\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eDual scale: PSI and bar (x100=kPa)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan face=\"Times\" size=\"5\" style=\"font-family: helvetica; font-size: 12pt;\"\u003eAmbient temperature: 30 F to 160 F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12487273939010,"sku":"SEC-201L-254H","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-201l-254h_923__2.jpg?v=1723127448"},{"product_id":"1-4-npt-0-30-psi-air-pressure-gauge-center-back-mount-with-2-face","title":"2\" Face 1\/4\" NPT 0-30 PSI Pressure Gauge Center Back Mount","description":"\u003cp style=\"text-align: center;\"\u003eBrand new industrial 0-30 PSI air pressure gauge with a 2\" face. This gauge has 1\/4\" NPT male threads which come out the back of the gauge. This gauge is top quality, made with a black steel case and a chrome front bezel. This gauge has number markings at 0, 5, 10, 15, 20, 25, and 30 PSI.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e• 0-30 PSI\u003cbr\u003e• 2\" Face\u003cbr\u003e• Solid Steel Construction\u003cbr\u003e• 1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486549536834,"sku":"2B30","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/2b30_20comp.jpg?v=1723128126"},{"product_id":"liquid-filled-0-3-000-psi-lower-side-mount-air-pressure-gauge-with-2-5-face","title":"2.5\" Face Liquid Filled 0-3,000 PSI Lower Side Mount Pressure Gauge PRO-201L-254P","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eLiquid-filled air pressure gauge. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge.\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis gauge reads at 0, 500, 1000, 1500, 2000, 2500, and 3000 PSI.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBar reading at 0, 50, 100, 150, 200\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Dial size: 2.5\"\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Lower mount \/ Side mount\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Connection size: 1\/4\" male NPT which measures about 1\/2\" in diameter.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Stainless steel case and bezel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Brass internals \u0026amp; connection (w\/built-in snubber)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Phosphor bronze bourdon tube\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Glycerine filled\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Accuracy: 3-2-3% per ANSI grade B\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Dual scale: PSI and bar (x100=kPa)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ambient temperature: 30 F to 160 F\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486703775810,"sku":"SEC-201L-254P","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/sec-201l-254p_597__2.jpg?v=1723126879"},{"product_id":"1-4-npt-0-200-psi-air-pressure-gauge-lower-side-mount-with-4-5-face","title":"4.5\" Face 1\/4\" NPT 0-200 PSI Pressure Gauge Lower Side Mount","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 0-200 PSI air pressure gauge. This high quality gauge features a 4.5\" face with easy to read markings and a large dial! This gauge is easy to see close up or from across your shop! This is a top quality gauge that is easy to read. This gauge will accurately measure air pressure up to 200 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe markings read at 0, 20, 40, 60, 80, 100, 120, 140, 160, 180, and 200 PSI with marks for every 5 PSI. This gauge comes equipped with a 1\/4\" Male NPT pipe thread inlet that measures about 1\/2\" in diameter.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Solid Steel Outer Case\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Large Easy to Read 4.5\" Dial\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Brass 1\/4\" MNPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Side Mount\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 200 PSI Max\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486488064066,"sku":"4.5S200-CSGauge","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/4.5s200_201.jpg?v=1723128239"},{"product_id":"1-4-npt-0-to-30-psi-vacuum-air-pressure-gauge-lower-side-mount-with-2-face","title":"2\" Face 1\/4\" NPT 0 - -30 PSI Air Vacuum Pressure Gauge Lower Side Mount 101D-204A","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new industrial grade vacuum pressure \/ PSI gauge. This gauge measures vacuum pressure from 0 to -30 PSI. This air pressure gauge is solid steel construction with a chrome front bezel and a 2\" face. This gauge has 1\/4\" NPT male solid brass threads which come out the side \/ bottom of the gauge. This gauge has number markings at 0, -5, -10, -15, -20, -25, and -30 PSI  as well as BAR markings with individual hash marks in between for accurate measurement.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eVacuum \/ PSI Pressure Gauge\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e0 to -30 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e2\" Face\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Steel Construction\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eChrome Front Bezel\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSolid Brass 1\/4\" Male NPT Threads\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e*1\/4\" male NPT threads, which measure about 1\/2\" outside diameter.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486522634306,"sku":"101D-204A","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/101d-204a-new2.jpg?v=1723128719"},{"product_id":"1-8-npt-0-15-psi-air-pressure-gauge-center-back-mount-with-1-5-face","title":"1.5\" Face 0-15 PSI Pressure Gauge 1\/8\" NPT Center Back Mount","description":"\u003cp style=\"text-align: center;\"\u003eOne brand new industrial 0-15 PSI air pressure gauge with a 1.5\" face. This gauge has 1\/8\" NPT male threads which come out the back of the gauge. This gauge is a top-quality gauge made with a black steel case and a chrome front bezel.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e•  0-15 PSI\u003cbr\u003e•  1.5\" Face\u003cbr\u003e• 1\/8\" Male NPT (3\/8\" Outside Diameter)\u003cbr\u003e• Tick Marks Every 2 PSI, Every 0.2 BAR\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486686736450,"sku":"102D-158B","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/102d-158b_20generic.jpg?v=1723128385"}],"url":"https:\/\/compressor-source.com\/collections\/air-compressor-accessories\/air-in-line-moisture-filters.oembed?page=2","provider":"Compressor Source","version":"1.0","type":"link"}