{"title":"Conrader Pilot Valves","description":"","products":[{"product_id":"quincy-112711-150-air-compressor-pilot-unloader-check-valve-combo","title":"Quincy 112711-150 Air Compressor Pilot Unloader Check Valve Combo","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis is a Quincy 112711-150 air compressor pilot unloader check valve combo. This valve cuts in at 95PSI and cuts out at 125PSI. This valve can be adjusted between 30-40+- PSI. This is a 1\/2\" compression fitting from the pump, 1\/2\" Female NPT from the tank, and two 1\/8\" Female NPT ports.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Factory Replacement Part\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Material: Machined Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• USA MADE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/2\" Female NPT Pipe Thread Outlet To Tank\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/2\" Compression Thread Inlet\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Two 1\/8\" NPT Female Pipe Thread Ports\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Factory Set At 95 PSI Cut In \u0026amp; 125 PSICut Out Pressure\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Pressure Can Be Adjusted 30-40 PSI Up or Down\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 30 CFM Rating\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Equipped With A Manual Unloader Flip Valve At The Top Of The Unloader\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486477119554,"sku":"NG-3-M-P1-95-125","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-3-m-p1-95-125-1-logo.jpg?v=1723122270"},{"product_id":"high-flow-3-4-female-145-175-psi-pilot-unloader-check-valve-combo-60-cfm-for-gas-compressors","title":"High Flow 3\/4\" Female 145-175 PSI Pilot \/ Unloader Check Valve Combo 60 CFM for Gas Compressors","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis is a Conrader unloader, pilot valve, check valve combination. This valve comes factory set 145-175 PSI however, it can be adjusted +\/- 30-40 PSI if needed. This valve has a 3\/4\" Female NPT inlet and a 3\/4\" Female NPT outlet port. Also included is the Conrader EM-50 Muffler on the exhaust port to help silence the outgoing air. This valve features a 1\/8\" port for unloader or throttle control. If an unloader or throttle control is not required in your application, this port can simply be plugged.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eItem - Unloader Check Valve\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eType - 145-175 PSI Pressure Range\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eMaterial - Brass\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eFlow Range Free Air (CFM) - 60 or less\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eItem - Pilot Unloader Check Valve\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eLength (In.) - 5-1\/2\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eMaterial - Brass\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eMax. Temp. (F) - 500\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eOutlet (In.) - 3\/4\" Female NPT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eInlet - 3\/4\" Female NPT\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eMax. Pressure (PSI) - 250\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpring Material - Stainless Steel\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e\u003cdiv class=\"attrubute\" style=\"text-align: center;\"\u003e\u003cdiv class=\"attitle\" style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePoppet - 15% Glass Filled\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486926630978,"sku":"NLG-1-M-145-175","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nlg-1-m-145-175-cs-3.jpg?v=1775867012"},{"product_id":"ingersoll-rand-pilot-unloader-check-valve-t30-gas-power-air-compressor-49816283c","title":"Ingersoll Rand Pilot Unloader Check Valve T30 Gas Powered Air Compressor 49816283C","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAftermarket \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new Pilot Unloader Check Valve for Ingersoll Rand.  This in-line piloted unloader check valve combination with relief valve, part number: 49816283-C. This is a solid brass valve that is manufactured by Conrader in the USA. This combination valve has a 5\/8\" inverted flare inlet on the top where your main line from the compressor pump comes in. The bottom port on the valve is a 1\/2\" female NPT that connects to your existing fitting (commonly has a relief valve in the side) to attach to the tank. This valve comes equipped with a 325 PSI relief valve and a 1\/8\" female NPT port to install a throttle control valve that is factory set to kick on at 145 PSI and shut off at 175 PSI.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Inlet: 5\/8\" Inverted Flare\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Tank Connection: 1\/2\" Female NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Throttle Control Valve Port: 1\/8\" Female NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Factory Set ON \/ OFF: 145-175 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Solid Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Made In USA\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• OEM Part Number: 49816283-C\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eFor Use With Ingersoll Rand T30 Gas Powered Air Compressors\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12487031390274,"sku":"49816283-C","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-13-p1-145-175_201.jpg?v=1723128035"},{"product_id":"1-2-compression-x-1-2-mnpt-95-125-psi-piloted-discharge-check-valve-unloader-combo","title":"1\/2\" Compression x 1\/2\" MNPT 95-125 PSI Piloted Discharge Check Valve \/ Unloader Combo","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis listing is for one new 95-125 PSI piloted discharge check valve\/unloader valve combo. This check valve is made by Conrader in the U.S.A., It is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM, and can be used on gas or electric compressors. This valve is equipped with a in-line check valve and attached to the side is a built-in piloted unloader valve set 95-125 PSI. This valve also has a muffler in the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 125 PSI. On the side of the valve, it has a 1\/8\" Female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Unloader ON\/OFF: 95-125 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air Inlet: 1\/2\" Compression Thread Used for 1\/2\" OD Copper or Aluminum Tubing\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Exhaust Port with Muffler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis valve is set at 95-125 PSI once your compressor pumps up to 125 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to atmosphere until your air tank pressure gets down to 95 PSI then the unloader will shut and your compressor will pump back up.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486720782402,"sku":"NSG-95-125-3383","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nsg-95-125-3383_431__1.jpg?v=1723128255"},{"product_id":"ingersoll-rand-pilot-unloader-check-valve-for-gas-engine-air-compressor-56288756","title":"Pilot Unloader Valve 105-145 PSI 1\/2\" IF x 1\/2\" NPT 56288756 Ingersoll Rand Replacement","description":"\u003cp\u003eThis listing is for a brand-new piloted unloader check valve combination with relief valve, designed as a high-quality aftermarket replacement for Ingersoll Rand part #56288756. Manufactured in the USA by Conrader, this solid brass valve offers durable, reliable performance and is commonly used on Ingersoll Rand twin tank gas-powered wheelbarrow-style air compressors.\u003c\/p\u003e\n\u003cp\u003eThe valve features a 1\/2\" inverted flare inlet on top (for connection to the main compressor line), and a 1\/2\" male NPT outlet on the bottom that threads directly into the air tank. It also includes a 1\/8\" female NPT port for adding a throttle control valve, if needed, and is factory preset to engage at 105 PSI and idle down at 145 PSI. A 325 PSI relief valve is built in for added safety.\u003c\/p\u003e\n\u003cp\u003ePlease note: The appearance may differ slightly from the original factory valve, but all connection points match OEM specifications. This upgraded version is proudly made in the USA and built for long-term performance.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e• Inlet: 1\/2\" Inverted Flare\u003cbr\u003e• Tank Connection: 1\/2\" Male NPT\u003cbr\u003e• Throttle Control Port: 1\/8\" Female NPT\u003cbr\u003e• Factory Set Pressure Range: 105 PSI On \/ 145 PSI Off\u003cbr\u003e• Relief Valve Rating: 325 PSI\u003cbr\u003e• Construction: Solid Brass\u003cbr\u003e• Country of Origin: Made in the USA\u003cbr\u003e• OEM Compatibility: Replaces Ingersoll Rand Part #56288756\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12487141032002,"sku":"56288756","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/56288756-cs-1.jpg?v=1782743784"},{"product_id":"gas-air-compressor-pilot-check-valve-combo-140-175-psi","title":"Pilot Unloader Valve 140 - 175 PSI 1\/2 NPT Conrader NG-5-M-140-175","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eThis listing is for a Air Compressor Piloted Unloader Valve with built in check valve.  Most commonly used on gas powered air compressors.  This pilot valve is set for 140-175 PSI From the Factory on this valve. But can be adjusted if needed approximately 30-40 PSI Higher or lower.  This valve has a 1\/2\" Female NPT Air Inlet and 1\/2\" Male NPT air Outlet.  There is an 1\/8\" Port on the side for a throttle control valve or cable.  Also on the side of this valve, there is a 3\/8\" Female NPT outlet to release the air once the compressor reaches full pressure.  It also comes with a 3\/8\" Male NPT Air muffler to help reduce noise that can also be removed if needed.  The pilot valve has a toggle lever on the top that can be put in the upward position for load free engine start or throttle control.  Please let us know if you have any other questions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• Most Commonly used on Gas Powered Air Compressors\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Set for 140-175 from Factory\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Can be adjusted 30-40 PSI higher or lower if needed\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Has a 1\/2\" Female NPT Air Inlet\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Has a 1\/2\" Male NPT Air Outlet\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Also has a 1\/8\" Port on the side for throttle control valve or cable\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• On side, it has a 3\/8\" Female NPT Outlet to release air once the compressor reaches full pressure\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Has a 3\/8\" Male NPT Air Muffler to help reduce Noise\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486451658818,"sku":"NG-5-M-140-175","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-5-m-140-175amz.jpg?v=1785443887"},{"product_id":"gas-air-pilot-compressor-unloader-check-valve-combo-95-125-psi-1-2-female","title":"Gas Air Pilot Compressor Unloader Check Valve Combo 95 - 125 PSI 1\/2\" Female","description":"\u003cp\u003eContinuous Run Air Compressor Piloted Discharge Check Valve. 1\/2\" Female NPT Inlet x 1\/2\" Female NPT Pipe Thread Outlet.\u003c\/p\u003e\n\u003cp\u003eThis piloted discharge check valve is a combination of a pilot valve, a pressure discharge valve, and check valve in one complete piece to make a constant run air compressor with gas engine or electric motor.\u003c\/p\u003e\n\u003cp\u003eThis valve will relieve the pressure the compressor is pumping out to the atmosphere through a silencer so the compressor can stay running without building pressure.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Material: Machined Brass\u003cbr\u003e• USA MADE\u003cbr\u003e• 1\/2\" Female NPT Pipe Thread Outlet To Tank\u003cbr\u003e• 1\/2\" Female NPT Thread Inlet\u003cbr\u003e• 1\/8\" NPT Female Pipe Thread Port For Throttle Control \u003cbr\u003e• Factory Set At 95 PSI Cut In \u0026amp; 125 PSICut Out Pressure\u003cbr\u003e• Pressure Can Be Adjusted 30-40 PSI Up or Down\u003cbr\u003e• 30 CFM Rating\u003cbr\u003e• Equipped With A Manual Unloader Flip Valve At The Top Of The Unloader\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12487075168322,"sku":"NG-1-M-95-125","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-1-m-95-125_202.jpg?v=1723123263"},{"product_id":"conrader-gas-compressor-pilot-unloader-check-valve-combo-60cfm-145-175-psi","title":"Conrader Gas Compressor Pilot Unloader Check Valve Combo 60CFM 145-175 PSI","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eConrader Gas Compressor Pilot\/Unloader\/Check Valve Combo - 60CFM 145-175 PSI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis is a Conrader unloader, pilot valve, check valve combination. This valve comes factory set 145-175PSI it can be adjusted 30-40+- if needed. This valve has a 3\/4\" Female NPT inlet and a 3\/4\" Male NPT outlet port. Also included is the Conrader EM-50 Muffler on the exhaust port to help silence the outgoing air. Also includes an 1\/8\" port for unloader or throttle control which can be plugged if not needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Item - Unloader Check Valve\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Type - 145-175 Pressure Range\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Material - Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Flow Range Free Air (CFM) - 60 or less\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Item - Pilot Unloader Check Valve\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Length (In.) - 5-1\/2\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Max. Temp. (F) - 500\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Outlet (In.) - 3\/4\" Male NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Inlet - 3\/4\" Female NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Max. Pressure (PSI) - 250\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Spring Material - Stainless Steel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Poppet - 15% Glass Filled\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486571262018,"sku":"NLG-6-M145-175","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ngl-6-m145-175_201.jpg?v=1723127594"},{"product_id":"conrader-gas-compressor-pilot-unloader-check-valve-combo-60cfm-145-175-psi-1","title":"Conrader Gas Compressor Pilot \/ Unloader \/ Check Valve Combo 60CFM 145-175 PSI","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis is a Conrader unloader, pilot valve, check valve combination. This valve comes factory set 145-175 PSI however, it can be adjusted +\/- 30-40 PSI if needed. This valve has a 1\" Female NPT inlet and a 1\" Male NPT outlet port. Also included is the Conrader EM-50 Muffler on the exhaust port to help silence the outgoing air. This valve features a 1\/8\" port for an unloader or throttle control. If you do not require an unloader or throttle control in your application, this port can simply be plugged.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Item - Unloader Check Valve\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Type - 145-175 PSI Pressure Range\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Material - Brass\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Flow Range Free Air (CFM) - 60 or less\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Item - Pilot Unloader Check Valve\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Length (In.) - 5-1\/2\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Material - Brass\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Max. Temp. (F) - 500\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Outlet (In.) - 1\" Male NPT\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Inlet - 1\" Female NPT\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Max. Pressure (PSI) - 250\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Spring Material - Stainless Steel\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Poppet - 15% Glass Filled\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486665797698,"sku":"NLG-19-M-145-175","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nlg-19-m-145-175_187__1.jpg?v=1723127612"},{"product_id":"gas-air-compressor-pilot-unloader-check-valve-combo-95-125-psi-3-4-x-1-2","title":"Gas Air Compressor Pilot Unloader Check Valve Combo 95 - 125 PSI 3\/4\" X 1\/2\"","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eContinuous Run Air Compressor Piloted Discharge Check Valve\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e3\/4\" Compression Side Inlet x 1\/2\" Female NPT Pipe Thread Outlet\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis piloted discharge check valve is a combination of a pilot valve, a pressure discharge valve, and check valve in one complete piece to make a constant run air compressor with gas engine or electric motor.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis Valve will relieve the pressure the compressor is pumping out to the atmosphere through a silencer so the compressor can stay running without building pressure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Material: Machined Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• USA MADE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/2\" Female NPT Pipe Thread Outlet To Tank\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 3\/4\" Compression Thread Side Inlet For 3\/4\" Copper Tubing\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/8\" NPT Female Pipe Thread Port For Throttle Control\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Factory Set At 95 PSI Cut In \u0026amp; 125 PSI Cut Out Pressure\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Pressure Can Be Adjusted 30-40 PSI Up or Down\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 30 CFM Rating\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Equipped With A Manual Unloader Flip Valve At The Top Of The Unloader\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486885638210,"sku":"NG-18-M-95-125","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-18-m-95-125-1.jpg?v=1723123244"},{"product_id":"gas-air-pilot-compressor-unloader-check-valve-combo-140-175-psi-1-2-female","title":"Gas Air Pilot Compressor Unloader Check Valve Combo 140 - 175 PSI 1\/2\" FNPT","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eContinuous Run Air Compressor Piloted Discharge Check Valve\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e1\/2\" Female NPT Inlet x 1\/2\" Female NPT Pipe Thread Outlet\u003cbr\u003e\u003cbr\u003eThis piloted discharge check valve is a combination of a pilot valve, a pressure discharge valve, and check valve in one complete piece to make a constant run air compressor with gas engine or electric motor.\u003cbr\u003e\u003cbr\u003eThis valve will relieve the pressure the compressor is pumping out to the atmosphere through a silencer so the compressor can stay running without building pressure.\u003cbr\u003e\u003cbr\u003e-Material: Machined Brass\u003cbr\u003e-USA MADE\u003cbr\u003e-1\/2\" Female NPT Pipe Thread Outlet To Tank\u003cbr\u003e-1\/2\" Female NPT Thread Inlet\u003cbr\u003e-1\/8\" NPT Female Pipe Thread Port For Throttle Control \u003cbr\u003e-Factory Set At 140 PSI Cut In \u0026amp; 175 PSICut Out Pressure\u003cbr\u003e-Pressure Can Be Adjusted 30-40 PSI Up or Down\u003cbr\u003e-30 CFM Rating\u003cbr\u003e-Equipped With A Manual Unloader Flip Valve At The Top Of The Unloader\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486493044802,"sku":"NG-1-M-140-175","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-1-m-140-175-cs-1.jpg?v=1782845193"},{"product_id":"1-2-fnpt-x-1-2-mnpt-95-125-psi-piloted-discharge-check-valve-unloader-combo","title":"1\/2\" FNPT x 1\/2\" MNPT 95-125 PSI Piloted Discharge Check Valve \/ Unloader Combo","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis listing is for one new 95-125 PSI piloted discharge check valve\/unloader valve combo with a 1\/2\" female npt for the air inlet port. This check valve combo is made by Conrader in the U.S.A., It is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM and can be used on gas or electric compressors. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set 95-125 PSI. This valve also has a muffler in the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 125 PSI. On the side of the valve, it has a 1\/8\" female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Unloader ON\/OFF 95-125 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air Inlet: 1\/2\" Female NPT (measures about 3\/4\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Exhaust Port with Muffler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis valve is set at 95-125 PSI once your compressor pumps up to 125 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to atmosphere until your air tank pressure gets down to 95 PSI then the unloader will shut and your compressor will pump back up.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12487248838722,"sku":"NSG-95-125-3517","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nsg-95-125-3517_800__1.jpg?v=1723122290"},{"product_id":"3-8-fnpt-x-1-2-mnpt-95-125-psi-piloted-discharge-check-valve-unloader-combo","title":"3\/8\" FNPT x 1\/2\" MNPT 95-125 PSI Piloted Discharge Check Valve \/ Unloader Combo","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis listing is for one new 95-125 PSI piloted discharge check valve\/unloader valve combo. This check valve combo is made by Conrader in the U.S.A., It is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM and can be used on gas or electric compressors. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set 95-125 PSI. This valve also has a muffler in the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 125 PSI. On the side of the valve, it has a 1\/8\" female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eFor more information see specs below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Unloader ON\/OFF: 95-125 PSI\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air Inlet: 3\/8\" Female NPT Thread (measures about 5\/8\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Air Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Exhaust Port with Muffler\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis valve is set at 95-125 PSI once your compressor pumps up to 125 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to the atmosphere until your air tank pressure gets down to 95 PSI Then the unloader will shut and your compressor will pump back up.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486695551042,"sku":"NSG-95-125-3519","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nsg-95-125-3519_591__1.jpg?v=1723128255"},{"product_id":"air-compressor-pilot-unloader-valve-bg1-m-110-135-psi-rolair-131b-gas-electric","title":"Pilot Unloader Valve 110-135 PSI Conrader BG1-M Rolair 131B","description":"\u003cp\u003ePiloted unloader valves are used in constant run applications where there are no intake unloaders present. They incorporate a discharge unloader on the body of a pilot valve to allow one valve to sense system pressure and vent discharge air to atmosphere when compressor reaches maximum pressure. At the minimum PSI (110) the pilot valve closes the discharge unloader and the compressor returns to normal operation. This valve can be adjusted 30-40 +- PSI if needed.\u003c\/p\u003e\n\u003cp\u003eThis Valve fits these Rolair Models: 3095K18CS, 4090HK17, 5520K17CS, 5715K17CS, 5GR30HK17, 6590HK18, 6820K17CS, 7722HK28, 8422HK30, GD4000PV5H, GD4500PV5R, \u0026amp; 5GR Series\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003eAir Compressor Piloted Unloader Valve 110-135\u003cbr\u003e1\/4\" Compression Inlet x 1\/4\" Male Outlet\u003c\/p\u003e\n\u003cp\u003eWorks With:\u003c\/p\u003e\n\u003cp\u003eRolair 131B\u003cbr\u003eEmglo PVMA\u003cbr\u003eJenny 141-1064\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFITS JENNY, EMGLO, DEWALT, J-AIR, QUINCY AND OTHERS\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486798377026,"sku":"BG1-M-110-135","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/bg1-m-110-135-cs-1.jpg?v=1747767999"},{"product_id":"air-compressor-unloader-control-pilot-valve-115-130-psi-brass-new","title":"Air Compressor Unloader Control Pilot Valve 115-130 PSI Brass RCB-M1-HU-115-130","description":"\u003cp\u003eAir compressor unloader pilot valve, made in the USA. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air actuated discharge valves. The valves preset operating range is 115-130 PSI, it has 1\/4\" male NPT threads that would be used for air hook-up or screwed into the compressor tank and has 1\/8\" female NPT threads on the side of the valve (as shown in the picture) . The 1\/8\" threads are the port used to control a throttle, intake unloaders or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchase at a local hardware store.\u003c\/p\u003e\n\u003cp\u003eThis valve's preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted. The bottom one, which is larger than the top one, controls the valve itself DO NOT ADJUST THE BOTTOM. The top one, which is the smaller one, right below the manual lift lever, controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Operating Pressure: 115-130 PSI\u003cbr\u003e• Max Operating Temperature: 300° F\u003cbr\u003e• Max Operating Pressure: 200 PSI\u003cbr\u003e• Air Inlet Threads: 1\/4\" Male NPT (measures about 1\/2\" diameter)\u003cbr\u003e• Air Outlet Threads: 1\/8\" Female NPT (measures about 3\/8\" diameter)\u003c\/p\u003e\n\u003cp\u003eAlso equipped with manual unloader \/ control lever which is located at the top of the valve.\u003cbr\u003e\u003cbr\u003eIf lifted in straight up position it opens the valve and puts pressure to the throttle control, head unloaders or discharge valve.\u003cbr\u003eThis valve is precision machined and all brass construction with stainless steel mesh filter on intake side of valve for a dirt free operation.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486462799938,"sku":"RCB-M1-HU-115-130","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-m1-hu-115-130_103__2.jpg?v=1723123926"},{"product_id":"rolair-131b-pilot-unloader-valve-110-135-psi-gas-electric-compressors","title":"Rolair 131B Pilot Unloader Valve 110–135 PSI 1\/4\" NPT BG1-M-110","description":"\u003cp\u003eThis is a genuine OEM Rolair 131B Conrader BG-series BG1-M air compressor pilot unloader valve preset for 110-135 PSI. The 131B is designed as a direct factory replacement for select Rolair gas and electric constant-run air compressor models.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cp\u003e• Tank Connection: 1\/4\" Male NPT Threads (connects to compressor tank)\u003cbr\u003e• Unloader Port: 1\/4\" Female NPT Threads (for unloader line connection)\u003cbr\u003e• Throttle Control Port: 1\/8\" Female NPT (optional use for throttle control)\u003cbr\u003e• Cut-In Pressure: 110 PSI\u003cbr\u003e• Cut-Out Pressure: 135 PSI\u003cbr\u003e• Durable Brass Construction: Built for corrosion resistance and long service life\u003cbr\u003e• Easy Installation: Standard connection sizes allow direct replacement\u003c\/p\u003e\n\u003cp\u003eThe valve features a 1\/4\" Male NPT thread for the tank connection and a 1\/4\" Female NPT unloader port for the unloader line. It also includes an optional 1\/8\" Female NPT throttle control port for engine idle control on gas-powered compressors. The valve is factory preset to activate the compressor at 110 PSI cut-in and shut it off at 135 PSI cut-out, supporting proper pressure regulation and reliable system operation.\u003c\/p\u003e\n\u003cp\u003eIt is suitable for compressor systems up to approximately 20 CFM and performs multiple functions, including pressure management, pump head unloading, and throttle control activation.\u003c\/p\u003e\n\u003cp\u003eCompatible Rolair Air Compressor Models:\u003c\/p\u003e\n\u003cp\u003e• 3095K18CS\u003cbr\u003e• 3230K30CS\u003cbr\u003e• 4090HK17\u003cbr\u003e• 5230K30CS\u003cbr\u003e• 5520K17CS\u003cbr\u003e• 5715K17CS\u003cbr\u003e• 6590HK18\u003cbr\u003e• 6820K17CS\u003cbr\u003e• 7722HK28\u003cbr\u003e• 8230HK30\u003cbr\u003e• 8422HK30\u003cbr\u003e• 5GR30HK17\u003cbr\u003e• 11GR Series\u003cbr\u003e• 13GR Series\u003cbr\u003e• 18GR Series\u003cbr\u003e• 5GR Series\u003cbr\u003e• GD4000PV5H\u003cbr\u003e• GD4500PV5R\u003c\/p\u003e\n\u003cp\u003eThis valve is commonly referenced under manufacturer part numbers BG1-M-110, 131BIG, 131B, BG1-M-110-135, and alternate SKU BG1M95125, with UPC references including 685650076638 and 795525334197. Jenny 141-1064, Dewalt 5131609-00, and Emglo PVMA are also common alternative part numbers. Other brands include Quincy and J-Air.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486442876994,"sku":"131BIG","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/131big-cs-1.jpg?v=1747688672"},{"product_id":"air-compressor-unloader-control-pilot-valve-95-125-psi","title":"Air Compressor Unloader Control Pilot Valve 95-125 PSI","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eBrand new air compressor unloader pilot valve, made in the USA. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air actuated discharge valves. The valves preset operating range is 95-125 PSI, it has 1\/4\" male NPT threads that would be used for air hook-up or screwed into the compressor tank and has 1\/8\" female NPT threads on the side of the valve (as shown in the picture) . The 1\/8\" threads are the port used to control a throttle, intake unloaders or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchase at a local hardware store.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eThis valve's preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted. The bottom one, which is larger than the top one, controls the valve itself DO NOT ADJUST THE BOTTOM. The top one, which is the smaller one, right below the manual lift lever, controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eOperating Pressure: 95-125 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eMax Operating Temperature: 300° F\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eMax Operating Pressure: 200 PSI\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eAir Inlet Threads: 1\/4\" Male NPT (measures about 1\/2\" diameter)\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003e\u003cbr\u003eAir Outlet Threads: 1\/8\" Female NPT (measures about 3\/8\" diameter)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eAlso equipped with manual unloader \/ control lever which is located at the top of the valve.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eIf lifted in straight up position it opens the valve and puts pressure to the throttle control, head unloaders or discharge valve.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eThis valve is precision machined and all brass construction with stainless steel mesh filter on intake side of valve for a dirt free operation.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486683787330,"sku":"RCB-M-HU-95-125","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-m-hu-95-125_801__2.jpg?v=1723122828"},{"product_id":"air-compressor-unloader-control-pilot-valve-125-150-psi","title":"Air Compressor Unloader Control Pilot Valve 125-150 PSI","description":"\u003cp\u003eBrand new air compressor unloader pilot valve, made in the USA. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air actuated discharge valves. The valves preset operating range is 125-150 PSI, it has 1\/4\" male NPT threads that would be used for air hook-up or screwed into the compressor tank and has 1\/8\" female NPT threads on the side of the valve (as shown in the picture) . The 1\/8\" threads are the port used to control a throttle, intake unloaders or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchase at a local hardware store. \u003c\/p\u003e\n\u003cp\u003eThis valve's preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted. The bottom one, which is larger than the top one, controls the valve itself DO NOT ADJUST THE BOTTOM. The top one, which is the smaller one, right below the manual lift lever, controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Max Operating Temperature: 300° F\u003cbr\u003e• Max operating pressure: 200 PSI\u003cbr\u003e• Air Inlet Threads: 1\/4\" Male NPT (measure about 1\/2\" diameter)\u003cbr\u003e• Air Outlet Threads: 1\/8\" Female NPT (measure about 3\/8\" diameter)\u003cbr\u003e• Also equipped with manual unloader \/ control lever which is located at the top of the valve.\u003cbr\u003e• If lifted in straight up position it opens the valve and puts pressure to the throttle control, head unloaders or discharge valve. \u003cbr\u003e• This valve is precision machined, all brass construction with stainless steel mesh filter on intake side of valve for a dirt free operation.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486512246850,"sku":"RCB-M-HU-125-150","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-m-hu-125-150_754__2.jpg?v=1723122272"},{"product_id":"air-compressor-unloader-control-pilot-valve-145-175-psi-brass-new","title":"Air Compressor Unloader Control Pilot Valve 145-175 PSI Brass RCB-M-HU-145-175","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAir Compressor Unloader Control Pilot Valve 145-175 PSI Brass New\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBrand new air compressor unloader pilot valve, made in the USA. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders, or air-actuated discharge valves. The valves preset operating range is 145-175 PSI, it has 1\/4\" male NPT threads that would be used for air hook-up or screwed into the compressor tank and has 1\/8\" female NPT threads on the side of the valve (as shown in the picture). The 1\/8\" threads are the port used to control a throttle, intake unloaders, or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchased at a local hardware store.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003eThis valve's preset pressure can be adjusted, below the manual unloader lever on the top of the valve, there are two screw settings that can be adjusted. The bottom one, which is larger than the top one, controls the valve itself DO NOT ADJUST THE BOTTOM. The top one, which is the smaller one, right below the manual lift lever, controls the pressure setting, when screwed in it will INCREASE both cut-in and cut-out pressure and when screwed out it will DECREASE both cut-in and cut-out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures \u0026amp; Specifications:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eOperating Pressure: 145-175 PSI\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eMax Operating Temperature: 300° F\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eMax Operating Pressure: 200 PSI\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eAir Inlet Threads: 1\/4\" Male NPT (measures about 1\/2\" diameter)\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eAir Outlet Threads: 1\/8\" Female NPT (measures about 3\/8\" diameter)\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\" also=\"\" equipped=\"\" with=\"\" manual=\"\" unloader=\"\" control=\"\" lever=\"\" which=\"\" is=\"\" located=\"\" at=\"\" the=\"\" top=\"\" of=\"\" valve=\"\" span=\"\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eIf lifted in a straight-up position it opens the valve and puts pressure on the throttle control, head unloaders, or discharge valve.\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003eThis valve is precision machined and all brass construction with a stainless steel mesh filter on the intake side of the valve for a dirt-free operation.\u003c\/div\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12487110590530,"sku":"RCB-M-HU-145-175","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-m-hu-145-175_733__2.jpg?v=1723122798"},{"product_id":"air-compressor-unloader-control-pilot-valve-115-130-psi","title":"Air compressor unloader control pilot valve 115-130 psi","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis listing is for a new air compressor unloader control pilot valve. This valve is just like our other unloader pilot valves with the male threads on the bottom except this is a shorter version with 1\/4\" female threads on the bottom so it doesn't take up so much room in cramped spaces. This valves is the same size in diameter but the height is 3 1\/8\" inches which is about an inch shorter than the other unloader valves. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air actuated discharge valves. The valves preset operating range is 115-130 PSI, it has 1\/4\" female NPT threads that would be used for air hook-up or screwed on to the compressor tank and has 1\/8\" female NPT threads on the side of the valve as shown in the picture which is the port used to control a throttle, intake unloaders or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchase at a local hardware store. This valves preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted there are lock-nuts holding each one in place the bottom one which is larger than the top one \u003cu\u003e\"you do not want to adjust\" \u003c\/u\u003e it controls the valve itself, the top one which is the smaller one right below the manual lift lever controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Operating pressure: cut in pressure 115 psi and cut out pressure is 130 psi\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Max operating temperature: 300 degrees F\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Max operating pressure: 200 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Air inlet threads: 1\/4\" female NPT which measures about 1\/2\" in diameter\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Air outlet threads: 1\/8\" female NPT which measures about 11\/32\" in diameter\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• Also equipped with manual unloader \/ control lever which is located at the top of the valve. • If lifted in straight up position it opens the valve and puts pressure to the throttle control, head unloaders or discharge valve. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• This valve is precision machined and all brass construction with stainless steel mesh filter on intake side of valve for a dirt free operation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eMade in the USA. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIf you have any questions about this item or another eBay item please feel free to contact us, our contact information is below. Thanks for looking and happy shopping!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486759579714,"sku":"RCB-F-HU-115-130","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-f-hu-115-130-cs-1.jpg?v=1779465025"},{"product_id":"air-compressor-unloader-control-pilot-valve-145-175-psi","title":"Air compressor unloader control pilot valve 145-175 psi","description":"\u003cp\u003eAir compressor unloader control pilot valve. This valve is just like our other unloader pilot valves with the male threads on the bottom except this is a shorter version with 1\/4\" female threads on the bottom so it doesn't take up so much room in cramped spaces. This valves is the same size in diameter but the height is 3 1\/8\" inches which is about an inch shorter than the other unloader valves. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air-actuated discharge valves. The valves preset operating range is 145-175 PSI, it has 1\/4\" female NPT threads that would be used for air hook-up or screwed onto the compressor tank and has 1\/8\" female NPT threads on the side of the valve as shown in the picture which is the port used to control a throttle, intake unloaders or discharge valve.\u003c\/p\u003e\n\u003cp\u003eIf more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchased at a local hardware store. This valve preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted there are lock-nuts holding each one in place the bottom one which is larger than the top one \"you do not want to adjust\"  it controls the valve itself, the top one which is the smaller one right below the manual lift lever controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Operating pressure: cut-in pressure is 145 psi and cut-out pressure is 175 psi \u003cbr\u003e• Max operating temperature: 300 degrees F\u003cbr\u003e• Max operating pressure: 200 PSI\u003cbr\u003e• Air inlet threads: 1\/4\" female NPT which measures about 1\/2\" in diameter\u003cbr\u003e• Air outlet threads: 1\/8\" female NPT which measures about 11\/32\" in diameter\u003cbr\u003e• Also equipped with a manual unloader\/control lever which is located at the top of the valve. • If lifted in straight up position it opens the valve and puts pressure on the throttle control, head unloaders, or discharge valve. \u003cbr\u003e• This valve is precision machined and all brass construction with a stainless steel mesh filter on the intake side of valve for a dirt-free operation.\u003c\/p\u003e\n\u003cp\u003eMade in the USA. \u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12486483836994,"sku":"RCB-F-HU-145-175","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-f-hu-145-175_550__2.jpg?v=1723125566"},{"product_id":"1-2-male-flare-x-1-2-mnpt-95-125-psi-piloted-discharge-check-valve-unloader-combo","title":"1\/2\" Male Flare x 1\/2\" MNPT 95-125 PSI Piloted Discharge Check Valve \/ Unloader Combo","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eThis listing is for one new 95-125 PSI piloted discharge check valve \/ unloader valve combo with a 1\/2\" male flare fitting for the air inlet port. This check valve combo is made by Conrader in the U.S.A. This is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM, and can be used on gas or electric air compressors. This valve is equipped with an in line check valve and attached to the side is a built in piloted unloader valve set 95-125 PSI. There is a built in muffler in the exhaust air port to quite down the unloaded air that is released once the compressor reaches 125 PSI. On the side of the valve there is a 1\/8\" Female NPT port that controls the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan face=\"helvetica, arial, sans-serif\" style=\"font-family: helvetica, arial, sans-serif;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e95-125 PSI ON\/OFF\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eAir Inlet: 1\/2\" Male Flare Fitting (measures about 3\/4\" in diameter)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eAir Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003e1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eExhaust Port with Muffler\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica, arial, sans-serif; font-size: 12pt;\"\u003eThis valve is factory set at 95-125 PSI. Once your compressor pumps up to 125 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to atmosphere until your air tank pressure gets down to 95 PSI. When you're air pressure gets down to 95 PSI the unloader will stop and your compressor will start building pressure again.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":12489311715394,"sku":"NSG-95-125-5234","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nsg-95-125-5234_940__1.jpg?v=1723127962"},{"product_id":"pilot-unloader-valve-for-air-compressor-1-4-mpt-95-125-psi","title":"Pilot Unloader Valve for Air Compressor 1\/4\" MPT 95-125 PSI","description":"\u003cp\u003eAir compressor unloader pilot valve, made in the USA. The valve is used to operate a compressed air system at a constant run with a preset pressure operating range to actuate throttle controls, intake unloaders or air actuated discharge valves. The valves preset operating range is 95-125 PSI, it has 1\/4\" Female NPT threads that would be used for air hook-up or screwed into the compressor tank and has 1\/8\" female NPT threads on the side of the valve (as shown in the picture). The 1\/8\" threads are the port used to control a throttle, intake unloaders or discharge valve. If more than one outlet is needed it is common to use a \"tee\" to make multiple ports which can be purchase at a local hardware store.\u003c\/p\u003e\n\u003cp\u003eThis valve's preset pressure can be adjusted, below the manual unloader lever on the top of the valve there are two screw settings that can be adjusted. The bottom one, which is larger than the top one, controls the valve itself DO NOT ADJUST THE BOTTOM. The top one, which is the smaller one, right below the manual lift lever, controls the pressure setting, when screwed in it will INCREASE both cut in and cut out pressure and when screwed out it will DECREASE both cut in and cut out pressure, it is not recommended to be adjusted more than about 15 PSI in either direction.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Operating Pressure: 95-125 PSI\u003cbr\u003e• Max Operating Temperature: 300° F\u003cbr\u003e• Max Operating Pressure: 200 PSI\u003cbr\u003e• Air Inlet Threads: 1\/4\" Female NPT (measures about 1\/2\" diameter)\u003cbr\u003e• Air Outlet Threads: 1\/8\" Female NPT (measures about 3\/8\" diameter)\u003c\/p\u003e\n\u003cp\u003eAlso equipped with manual unloader \/ control lever which is located at the top of the valve.\u003cbr\u003eIf lifted in straight up position it opens the valve and puts pressure to the throttle control, head unloaders or discharge valve.\u003c\/p\u003e\n\u003cp\u003eThis valve is precision machined and all brass construction with stainless steel mesh filter on intake side of valve for a dirt free operation.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":13779220234306,"sku":"RCB-F-HU-95-125","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rcb-f-hu-95-125-1.jpg?v=1723124924"},{"product_id":"gas-compressor-pilot-unloader-check-valve-combo-60cfm-95-125-psi-3-4-x-3-4","title":"Gas Compressor Pilot \/ Unloader \/ Check Valve Combo 60CFM 95-125 PSI 3\/4\" x 3\/4\"","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cu\u003eConrader Unloader Check Valve 95-125 PSI\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e This is a high CFM Conrader unloader, pilot valve, check valve combination. This valve comes factory set 95-125 PSI it can be adjusted 30-40+- if needed. This valve has a 3\/4\" Female NPT inlet and a 3\/4\" Male NPT outlet port. Also included is the Conrader EM-50 Muffler on the exhaust port to help silence the outgoing air. Also includes a 1\/8\" port for unloader or throttle control which can be plugged if not needed.\u003cbr\u003e \u003cstrong\u003e\u003cbr\u003e \u003cu\u003eSpecifications\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Item - Unloader Check Valve\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Type - 95-125 PSI Pressure Range\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Material - Brass\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Flow Range Free Air (CFM) - 60 or less\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Length (In.) - 5-1\/2\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Max. Temp. (F) - 500\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Outlet (In.) - 3\/4\" Male NPT (Note: 3\/4\" NPT Measures About 1\" In Diameter)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Inlet - 3\/4\" Female NPT (Note: 3\/4\" NPT Measures About 1\" In Diameter)\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Max. Pressure (PSI) - 250\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Spring Material - Stainless Steel\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Poppet - 15% Glass Filled\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":14264451006530,"sku":"NLG-6-M-95-125","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nlg-6-m-95-125_201.jpg?v=1723123355"},{"product_id":"air-compressor-pilot-unloader-check-valve-combo-145-175-psi-5-8-x-1-2","title":"Air Compressor Pilot Unloader Check Valve Combo 145 - 175 PSI 5\/8\" X 1\/2\"","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eConrader NG Air Compressor Pilot \/ Check Valve\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThis piloted discharge check valve is a combination of a pilot valve, a pressure discharge valve, and check valve in one complete piece to make a constant run air compressor with gas engine or electric motor. This check valve combo is made by Conrader in the U.S.A. and is an NG series valve. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set to 145-175 PSI. There is a muffler on the exhaust air port to quiet down the unloaded air that is released once the compressor reaches 175 PSI. On top there is a 1\/4\" FNPT port for a relief valve and on the back of the valve there is a 1\/8\" Female NPT port that controls the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Material: Brass\u003cbr\u003e• U.S.A. Made\u003cbr\u003e• 1\/4\" FNPT Top Port for Relief\u003cbr\u003e• 5\/8\" Inverted SAE Flare Side Inlet\u003cbr\u003e• 1\/2\" Male NPT Pipe Thread Outlet to Tank\u003cbr\u003e• 1\/8\" NPT Female Pipe Thread Port for Throttle or Unloader Control\u003cbr\u003e• Factory Set at 140 PSI Cut In \u0026amp; 175 PSI Cut Out Pressure\u003cbr\u003e• Pressure Can Be Adjusted 30-40 PSI Up or Down\u003cbr\u003e• 30 CFM Max Rating\u003cbr\u003e• Equipped with a Manual Unloader Flip Valve at the Top of the Unloader\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eThis valve is factory set at 145-175 PSI. Once your compressor pumps up to 175 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to atmosphere until your air tank pressure gets down to 145 PSI. When your air pressure gets down to 145 PSI the unloader will stop, and your compressor will start building pressure again.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":16111346122818,"sku":"NG-16-M-P2-145-175","price":98.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-16-m-p2-145-175_202.jpg?v=1723124720"},{"product_id":"3-4-compression-x-1-2-npt-gas-air-compressor-pilot-unloader-check-valve-145-175","title":"3\/4 Compression x 1\/2\" NPT Gas Air Compressor Pilot Unloader Check Valve 145 - 175 PSI","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eConrader NG Air Compressor Pilot \/ Check Valve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis piloted discharge check valve is a combination of a pilot valve, a pressure discharge valve, and check valve in one complete piece to make a constant run air compressor with gas engine or electric motor. This check valve combo is made by Conrader in the U.S.A. and is an NG series valve. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set to 145-175 PSI. There is a muffler on the exhaust air port to quiet down the unloaded air that is released once the compressor reaches 175 PSI. On the back of the valve there is a 1\/8\" Female NPT port that controls the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Material: Machined Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• USA MADE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/2\" Male NPT Pipe Thread Outlet to Tank\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 3\/4\" Compression Thread Side Inlet for 3\/4\" OD Copper Tubing\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/8\" NPT Female Pipe Thread Port for Throttle or Unloader Control\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Factory Set at 145 PSI Cut In \u0026amp; 175 PSI Cut Out Pressure\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Pressure Can Be Adjusted 30-40 PSI Up or Down\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 30 CFM Max Rating\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Equipped with a Manual Unloader Flip Valve at the Top of the Unloader\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThis valve is factory set at 145-175 PSI. Once your compressor pumps up to 175 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to atmosphere until your air tank pressure gets down to 145 PSI. When your air pressure gets down to 145 PSI the unloader will stop, and your compressor will start building pressure again.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":16118823157826,"sku":"NG-20M-P2-145-175","price":56.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/ng-20m-p2-140-175_201.jpg?v=1723125005"},{"product_id":"champion-air-compressor-pilot-valve-unloader-145-175-psi-1-4-fnpt-x-1-8-fnpt","title":"Champion Air Compressor Pilot Valve Unloader 145-175 PSI 1\/4\" FNPT x 1\/8\" FNPT","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eConrader RCT1-F1-145-175 Pilot Valve - Replacement for \u003cspan\u003eM2853\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003eConrader Pilot Valves are used on compressed air systems to control other devices using a pneumatic signal. The pilot valve is factory set in a pressure range with a unload (cut-out) and load (cut-in) setting. As the system pressure increases and the unload (cut-out) pressure is achieved, the pilot valve opens and pressurizes the line downstream of the pilot. As the system pressure decreases and the load (cut-in) pressure is achieved, the pilot valve closes and depressurizes the line downstream of the pilot valve. This RCT1-F1-145-175 pilot valve features 1\/4\" female NPT inlet and 1\/8\" female NPT outlet threads and has a pre-set pressure range of 145-175 PSI. This works as a great replacement for the \u003cspan\u003eM2853 that is commonly found on Champion Air Compressors. This pilot valve does not have a manual lever for the unloader. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures and Specifications:\u003cbr\u003e\u003cbr\u003e• Operating Pressure: 145-175 PSI\u003cbr\u003e• Operating Temperature Range: -15°F to 400°F\u003cbr\u003e• Inlet Connection Type: Female NPT\u003cbr\u003e• Inlet Connection Size: 1\/4\" FNPT\u003cbr\u003e• Outlet Connection Type: Female NPT\u003cbr\u003e• Outlet Connection Size: 1\/8\" FNPT\u003cbr\u003e• Mounting Connection: 3\/8\" - 16 UNC 2B\u003cbr\u003e\u003cbr\u003eThis listing is for one (1) Conrader RCT1-F1-145-175 pilot valve. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":31527186137154,"sku":"RCT1-F1-145-175","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/rct1-f1-145-175_201.jpg?v=1723125119"},{"product_id":"110-135-psi-air-compressor-pilot-check-valve-unloader-1-2-male-flare-fitting","title":"110-135 PSI Air Compressor Pilot Check Valve Unloader 1\/2\" Male Flare Fitting","description":"\u003cp\u003eConrader NSG Air Compressor Pilot \/ Check Valve Unloader with Muffler\u003c\/p\u003e\n\u003cp\u003eThis listing is for one new 110-135 PSI piloted discharge check valve\/unloader valve combo with a 1\/2\" male flare fitting for the air inlet port. This check valve combo is made by Conrader in the U.S.A. and is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM and can be used on gas or electric air compressors. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set to 110-135 PSI. There is a muffler on the exhaust air port to quiet down the unloaded air that is released once the compressor reaches 135 PSI. On the side of the valve, there is a 1\/8\" Female NPT port that controls the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• 110-135 PSI ON\/OFF\u003cbr\u003e• Air Inlet: 1\/2\" Male Flare Fitting (measures about 3\/4\" in diameter)\u003cbr\u003e• Air Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003cbr\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003cbr\u003e• Exhaust Port with Muffler\u003c\/p\u003e\n\u003cp\u003eThis valve is factory set at 110-135 PSI. Once your compressor pumps up to 135 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to the atmosphere until your air tank pressure gets down to 110 PSI. When your air pressure gets down to 110 PSI the unloader will stop, and your compressor will start building pressure again.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":39647357370434,"sku":"NSG-5-M-110-135-5234","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/nsg-5-m-110-135-5234_201.jpg?v=1640274312"},{"product_id":"110-135-psi-air-compressor-pilot-check-valve-unloader-1-2-fnpt-inlet-conrader","title":"110-135 PSI Air Compressor Pilot Check Valve Unloader 1\/2\" FNPT Inlet Conrader","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eConrader NSG Air Compressor Pilot \/ Check Valve Unloader with Muffler\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eThis listing is for one new 110-135 PSI piloted discharge check valve\/unloader valve combo with a 1\/2\" female NPT for the air inlet port. This check valve combo is made by Conrader in the U.S.A. and is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM and can be used on gas or electric compressors. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set to 110-135 PSI. This valve also has a muffler on the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 135 PSI. On the side of the valve, it has a 1\/8\" female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003cbr\u003e \u003cstrong\u003e\u003cbr\u003e \u003cspan style=\"text-decoration: underline;\"\u003eSpecifications\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e• Unloader ON\/OFF 110-135 PSI\u003cbr\u003e• Air Inlet: 1\/2\" Female NPT (measures about 3\/4\" in diameter)\u003cbr\u003e• Air outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003cbr\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003cbr\u003e• Exhaust Port with Muffler\u003cbr\u003e\u003cbr\u003eThis valve is set at 110-135 PSI once your compressor pumps up to 135 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to the atmosphere until your air tank pressure gets down to 110 PSI then the unloader will shut, and your compressor will pump back up.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":39647357435970,"sku":"NSG-5-M-110-135-3517","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/nsg-5-m-110-135-3517_201.jpg?v=1640274323"},{"product_id":"110-135-psi-air-compressor-pilot-check-valve-unloader-3-8-fnpt-inlet-conrader","title":"110-135 PSI Air Compressor Pilot Check Valve Unloader 3\/8\" FNPT Inlet Conrader","description":"\u003cp\u003eThis listing is for one new 110-135 PSI piloted discharge check valve\/unloader valve combo. This valve is usually used on gas or electric compressors that pump less than 20 CFM. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set 110-135 PSI. This valve also has a muffler on the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 135 PSI. On the side of the valve, it has a 1\/8\" female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003e• Unloader ON\/OFF: 110-135 PSI\u003cbr\u003e• Air Inlet: 3\/8\" Female NPT Thread (measures about 5\/8\" in diameter)\u003cbr\u003e• Air Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003cbr\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003cbr\u003e• Exhaust Port with Muffler\u003c\/p\u003e\n\u003cp\u003eThis valve is set at 110-135 PSI once your compressor pumps up to 135 PSI the unloader valve will kick in and your compressor will pump air through the muffler out to the atmosphere until your air tank pressure gets down to 110 PSI then the unloader will shut, and your compressor will pump back up.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":39647357403202,"sku":"NSG-5-M-110-135-3519","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/nsg-5-m-110-135-3519_202.jpg?v=1640274323"},{"product_id":"110-135-psi-air-compressor-pilot-check-valve-unloader-1-2-compression-inlet","title":"110-135 PSI Air Compressor Pilot Check Valve Unloader 1\/2\" Compression Inlet","description":"\u003cp\u003eThis listing is for one new 110-135 PSI piloted discharge check valve\/unloader valve combo. This check valve is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM and can be used on gas or electric compressors. This valve is equipped with an in-line check valve and attached to the side is a built-in piloted unloader valve set 110-135 PSI. This valve also has a muffler on the exhaust air port to quiet down the unloaded exhaust air that is released once the compressor reaches 135 PSI. On the side of the valve, it has a 1\/8\" female NPT port, to control the throttle on a gas engine and\/or unloader valves on some pumps.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003c\/p\u003e\n\u003cp\u003e• Unloader ON\/OFF: 110-135PSI\u003cbr\u003e• Air Inlet: 1\/2\" Compression Thread Used for 1\/2\" OD Copper or Aluminum Tubing\u003cbr\u003e• Air Outlet: 1\/2\" Male NPT (measures about 3\/4\" in diameter)\u003cbr\u003e• 1\/8\" Side Unloader Port (measures about 3\/8\" in diameter)\u003cbr\u003e• Exhaust Port with Muffler\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":39647357468738,"sku":"NSG-5-M-110-135-3383","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/nsg-5-m-110-135-3383_201.jpg?v=1640274312"},{"product_id":"conrader-gas-compressor-pilot-unloader-check-valve-combo-high-cfm-120-150-psi","title":"Conrader Gas Compressor Pilot \/ Unloader Check Valve Combo High CFM 120-150 PSI","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eThis is a Conrader unloader, pilot valve, check valve combination. This valve comes factory set 120-150 PSI it can be adjusted 30-40+- if needed. This valve has a 3\/4\" Female NPT inlet and a 3\/4\" Male NPT outlet port. Also included is the Conrader EM-50 Muffler on the exhaust port to help silence the outgoing air. Also includes an 1\/8\" port for unloader or throttle control which can be plugged if not needed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e• Item - Unloader Check Valve\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Type - 120-150 Pressure Range\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Material - Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Flow Range Free Air (CFM) - 60 or less\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e • Length (In.) - 5-1\/2\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Material - Brass\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Max. Temp. (F) - 500\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Outlet (In.) - 3\/4\" Male NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Inlet - 3\/4\" Female NPT\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Max. Pressure (PSI) - 250\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Spring Material - Stainless Steel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Poppet - 15% Glass Filled\u003c\/strong\u003e\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":40446157193282,"sku":"NLG-6-M-120-150","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/nlg-6-m120-150_20comp.jpg?v=1696361546"},{"product_id":"new-d55151-d55152-air-compressor-pilot-check-valve-brass-replacement-assembly","title":"D55151 D55152 Air Compressor Pilot Check Valve Brass Replacement Assembly CAC3812SU3T\/2","description":"\u003cp\u003eCheck valve assembly: CAC3812-SU3T. This check valve is compatible with the following models: DeWALT: D55151 Type 1 Compressor, D55151 Type 3 Compressor, D55152 Type 1 Compressor, D55153 Type 1 Compressor, D55153 Type 2 Compressor, D55153 Type 3 Compressor, D55154 Type 1 Compressor, D55152 Type 2 1.1HP Compressor, AM390 Compressor, AM782HC4V Type 1 Compressor, AM782HC4V Type 2 Compressor.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Valve Inlet Threads: 3\/8\" Compression (measures about 9\/16\" outside diameter)\u003cbr\u003e• Outlet Threads \/ Tank Threads: 1\/2\" Male NPT (measures about 3\/4\" outside diameter)\u003cbr\u003e• Side Port: 1\/8\" Female NPT (measures about 10\/32\" inside diameter)\u003cbr\u003e• Unloader Assist On Top - Helps with Start Up \/ Shut Off\u003cbr\u003e• Total Length: 3\"\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":41399939498050,"sku":"CAC3812SU3T\/2","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/cac3812su3t2_208__1.jpg?v=1718144352"},{"product_id":"air-compressor-pilot-unloader-valve-bg1-m-95-125-psi-rolair-131b-gas-or-electric","title":"Air Compressor Pilot Unloader Valve BG1-M 95-125 PSI Rolair 131B Gas or Electric","description":"\u003cp\u003eAir Compressor Pilot Unloader Valve with Muffler Vent – 95–125 PSI Adjustable – Fits Rolair, DeWalt, Quincy, Jenny \u0026amp; More\u003c\/p\u003e\n\u003cp\u003eThis piloted unloader valve is designed for constant-run air compressor applications where an intake unloader is not used. It automatically senses system pressure and vents discharge air to the atmosphere once maximum pressure is reached, preventing unnecessary load on the compressor. When tank pressure drops to approximately 95 PSI, the valve closes and allows the compressor to resume normal operation.\u003c\/p\u003e\n\u003cp\u003eThe valve comes preset for a 95–125 PSI operating range and includes a felt muffler to quiet exhaust air during unloading. Pressure settings can be fine-tuned within an adjustment range of approximately ±15 PSI to suit your specific compressor setup.\u003c\/p\u003e\n\u003cp\u003eAdjustment is simple and controlled. Beneath the manual lift lever on top of the valve are two adjustment screws secured with lock nuts. The larger lower screw controls the internal valve function and should not be adjusted. The smaller upper screw adjusts both cut-in and cut-out pressures—turning it inward increases pressure, while turning it outward decreases pressure. Adjustments should be kept within the recommended range to maintain proper operation.\u003c\/p\u003e\n\u003cp\u003eThis valve is commonly used as a direct replacement on many popular compressor brands and models and is built for reliable performance in demanding shop and industrial environments.\u003c\/p\u003e\n\u003cp\u003eFeatures \u0026amp; Specifications:\u003c\/p\u003e\n\u003cp\u003e• Operating Pressure Range: Preset 95–125 PSI (adjustable approx. ±15 PSI)\u003cbr\u003e• Application: Constant run air compressors without intake unloaders\u003cbr\u003e• Automatic venting at max pressure, closes at cut-in pressure\u003cbr\u003e• Includes felt muffler to reduce venting noise\u003cbr\u003e• Tank Pressure Inlet: 1\/4\" Male NPT\u003cbr\u003e• Unloader Connection: 1\/4\" Compression fitting\u003cbr\u003e• Additional Port: 1\/8\" Female NPT (for throttle control if required)\u003cbr\u003e• Manual lift lever for testing or service\u003cbr\u003e• Durable construction for long service life\u003c\/p\u003e\n\u003cp\u003eCommon Replacements \/ Compatibility:\u003c\/p\u003e\n\u003cp\u003e• Rolair 131B\u003cbr\u003e• Emglo PVMA\u003cbr\u003e• Jenny 141-1064\u003cbr\u003e• DeWalt 5131609-00\u003c\/p\u003e\n\u003cp\u003eAlso compatible with many compressors from Rolair, DeWalt, Quincy, J-Air, Jenny, Emglo, and other manufacturers with similar pilot-operated unloader systems.\u003c\/p\u003e","brand":"Conrader","offers":[{"title":"Default Title","offer_id":42941705355330,"sku":"BG1-M-95-125","price":42.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/bg1-m-110-135-cs-1_c271d3d2-d483-483d-a2b8-96d9571787a3.jpg?v=1769556069"}],"url":"https:\/\/compressor-source.com\/collections\/conrader-pilot-valves.oembed","provider":"Compressor Source","version":"1.0","type":"link"}