{"title":"Lefoo Pressure Switches","description":"\u003cp\u003eShop quality Lefoo pressure switches for air compressors, including the popular \u003ca href=\"https:\/\/compressor-source.com\/products\/95-125-psi-4-port-pressure-switch-fits-hitachi-dewalt-emglo-compressors-lf10-l4h\" title=\"Lefoo LF10-4H Pressure Switch\"\u003eLF10-4H\u003c\/a\u003e model. Known for reliability and accurate pressure control, and compatible with many standard air compressor setups. Browse our full selection of \u003ca href=\"\/collections\/pressure-switches\" title=\"Pressure Switches\"\u003epressure switches\u003c\/a\u003e for more options.\u003c\/p\u003e","products":[{"product_id":"four-port-95-125-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 95 - 125 PSI 16 Amp 69MB7LY2C-Switch","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 95-125 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet hook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1\/4\" female NPT. This switch is also equipped with a on and off lever and a unloader valve on the side, which is 1\/4\" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eAIR INLETS:  FOUR 1\/4\" NPT FEMALE PORTS, WHICH CAN BE CHANGED TO MALE USING A PIPE NIPPLE THAT CAN BE BOUGHT AT A LOCAL HARDWARE STORE.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eUNLOADER SIZE: 1\/4\" COMPRESSION \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eEQUIPPED WITH MANUAL ON AND OFF LEVER\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePRESSURE SETTING: TURNS ON AT 95 PSI AND SHUTS OFF AT 125 PSI, CAN BE ADJUSTED FOR CUSTOM SETTING WHICH IS EXPLAINED UNDER THE LID OF THE PRESSURE SWITCH.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003ePOWER AND AMP RATING: 20 AMPS MAX AT 120 VOLT, 12 AMPS MAX AT 240 VOLT SINGLE PHASE, 9.6 AMPS MAX AT 240 VOLT 3 PHASE. \u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e( IF YOU HAVE A LARGER INDUSTRIAL COMPRESSOR WITH A MAGNETIC STARTER AMPS DO NOT MATTER, ALL THE SWITCH IS DOING IS TELLING THE STARTER WHEN TO SHUT ON AND OFF).\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e12 VOLT POWER DC: 8.6 AMPS AT 32 VOLTS DC, 3.1 AMPS AT 120 VOLT DC, 1.6 AMPS AT 240 VOLT DC.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487006486594,"sku":"69MB7LY2C-Switch","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/69mb7ly2c-switch-1-cs.jpg?v=1677110085"},{"product_id":"four-port-145-175-psi-air-compressor-pressure-switch","title":"4 Port Pressure Switch 145 - 175 PSI  16 Amp 69MB9LY2C-Switch","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new 145-175 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet hook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1\/4\" female NPT. This switch is also equipped with a on and off lever and a unloader valve on the side, which is 1\/4\" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eAir Inlets: Four 1\/4\" NPT Female Ports, which can be changed to Male using a pipe nipple that can be purchased at a local hardware store.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eUnloader Size: 1\/4\" Compression\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eEquipped with Manual On and Off Lever\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePressure Setting: Turns on at 145 PSI and shuts off at 175 PSI, can be adjusted for custom settings which is expalined under the lid of the pressure switch.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePower\/Amp Rating: 20 Amps max at 120 Volt \/ 12 Amps at 240 Volt \/ 9.6 Ams at 3 PH 240 Volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e(If you have a larger Industiral compressor with a magnetic starter, amps do not matter, all the switch is doing is telling teh starter when to turn off and on.)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica;\"\u003e\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e12 Volt Power DC: 8.6 Amps at 32 Volts DC, 3.1 Amps at 120 Volts DC, 1.6 Amps at 240 Volt DC.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486451462210,"sku":"69MB9LY2C-Switch","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/69mb9ly2c-switch-1-cs.jpg?v=1677088385"},{"product_id":"single-port-145-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 145 - 175 PSI 16 Amp 69MB9LY","description":"\u003cp\u003eLEFOO 140-175 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a single 1\/4\" female NPT air inlet port. ( Note: NPT measures about 3\/4\" in diameter.)\u003c\/p\u003e\n\u003cp\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load-free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThe preset pressure of this switch is most commonly used on two stage compressors as long as the amperage is less than 20 amps on 120 volt or 12 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003c\/p\u003e\n\u003cp\u003eThis switch comes preset to turn the compressor on at 140 psi and shut off at 175 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Preset: 140-175 PSI\u003cbr\u003e• Minimum On: 50 PSI\u003cbr\u003e• Maximum Off Pressure: 175 PSI\u003cbr\u003e• Pressure Differential: 35-55 PSI\u003cbr\u003e• 1\/4\" Compression Unloader Valve Connection\u003cbr\u003e• 1\/4\" Female NPT Tank Connection\u003cbr\u003e• Max Amps: 20 Amps @ 120V \/ 12 Amp @ 240V \/ 9.6 Amp @ 3PH 240 Volt\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486461063234,"sku":"69MB9LY","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69mb9ly-switch-1-cs_7787c0e4-4bae-4120-b214-fd839306d84a.jpg?v=1689180653"},{"product_id":"single-port-95-125-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 16 Amp 69MB7LY","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eLEFOO 95-125 PSI air compressor pressure switch control valve with a single female NPT air inlet connection port. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D, and more. This switch is equipped with an unloader valve, an on\/off lever, and a single female NPT air inlet port. (Note: 1\/4\" NPT measures about 1\/2\" in diameter.)The unloader equipped with this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eThe preset pressure of this switch is most commonly used on two-stage compressors as long as the amperage is less than 20 amps on 120 volts or 12 amps on 240 volts, however, if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case, it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• PRESET 95-125 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MINIMUM ON: 35 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1\/4\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• 1\/4\" FEMALE NPT TANK CONNECTION.=\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e• MAX AMPS, 20 AMPS AT 120VOLT \/ 12 AMP AT 240 VOLT, AND 9.6 AMP AT 3PH 240 VOLT\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486581289026,"sku":"69MB7LY","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/69mb9ly-switch-1-cs.jpg?v=1689180651"},{"product_id":"4-port-3-phase-140-175-psi-pressure-switch","title":"4 Port Pressure Switch 140 - 175 PSI 16 Amp \nLF18-H4-140-175","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e                Brand new heavy duty 3 phase 140-175 PSI air compressor, pressure switch, control valve with a four port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D, Condor and more. This switch is equipped with an unloader valve, on \/ off pressure control button, and a four port mounting manifold.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single, two, or three stage compressor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cspan style=\"font-size: 14pt;\"\u003eSpecifications:\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-PRESET PRESSURE: 140-175 PSI\u003cbr\u003e-MINIMUM ON: 80 PSI\u003cbr\u003e-MAXIMUM OFF PRESSURE: 175 PSI\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-¼\" FEMALE NPT TANK CONNECTION x4\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-Works With 208, 220, 230, 240, 440 Volt Applications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e-This switch is rated at 16 amp on 440 volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486744670274,"sku":"LF18-H4-140-175","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf18-h4-140-175-1-cs.jpg?v=1677196974"},{"product_id":"single-port-26-amp-heavy-duty-140-175-psi-pressure-switch","title":"1 Port Pressure Switch 140 - 175 PSI 26 Amp LF10A-H1-140-175","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eBrand new  heavy duty, 26 Amp LEFOO 140-175 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, on \/ off lever, and a single port mounting manifold. This is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26 Amp contacts to provide a longer lasting switch in demanding applications.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single stage or two stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003cbr\u003e\u003cbr\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003ePreset 140-175 PSI\u003cbr\u003eMinimum On: 80 PSI\u003cbr\u003eMaximum Off Pressure: 175 PSI\u003cbr\u003ePressure Differential: 35-55 PSI\u003cbr\u003e1\/4\" Compression Unloader Valve Connection\u003cbr\u003e1\/4\" Female NPT Tank Connection\u003cbr\u003eMax Amps: 26 Amps at 120 Volt \/ 26 Amp at 240 Volt\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487054196802,"sku":"LF10A-H1-140-175","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10a-h1-140-175-11-cs.jpg?v=1677262125"},{"product_id":"4-port-26-amp-heavy-duty-140-175-psi-pressure-switch","title":"4 Port Pressure Switch 26 Amp 140 - 175 PSI Lefoo LF-10A-H4","description":"\u003cp\u003eHeavy duty, 26 Amp LEFOO 140-175 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas , Square-D and more. This switch is equipped with an unloader valve, a four port mounting manifold, and an on\/off lever. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy duty 26 Amp contacts to provide a longer lasting switch in demanding applications.\u003c\/p\u003e\n\u003cp\u003eThe four port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch. The unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThis switch can be used on a single stage or two stage compressor as long as the amperage is less than 26 amps on 120 volt or 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• PRESET 140-175 PSI\u003cbr\u003e• MINIMUM ON: 50 PSI\u003cbr\u003e• MAXIMUM OFF PRESSURE: 175 PSI\u003cbr\u003e• PRESSURE DIFFERENTIAL: 35-55 PSI\u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1\/4\" FEMALE NTP PORTS.\u003cbr\u003e• MAX AMPS, 26 AMPS AT 120VOLT \/ 26 AMP AT 240 VOLT\u003c\/p\u003e\n\u003cp\u003eDimensions:\u003cbr\u003e• 4-3\/4\" Long (Farthest Point)\u003cbr\u003e• 2-5\/8\" Wide (Farthest Point)\u003cbr\u003e• 3-3\/4\" (Bottom of Manifold to Top of Lid)\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12487318044738,"sku":"LF-10A-H4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf-10a-h4-1-cs.jpg?v=1677001594"},{"product_id":"single-port-26-amp-heavy-duty-95-125-psi-pressure-switch","title":"1 Port Pressure Switch 95 - 125 PSI 26 Amp LF10A-L1-95-125","description":"\u003cp\u003eHeavy duty, 26 Amp LEFOO 95-125 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D, and more. This switch is equipped with an unloader valve, on\/off lever, and a single port mounting manifold. This is similar to the regular single port pressure switch, but this switch is equipped with heavy-duty 26Amp contacts to provide a longer-lasting switch in demanding applications.\u003cbr\u003e\u003cbr\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load-free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/p\u003e\n\u003cp\u003eThis switch can be used on a single-stage or two-stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volts, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure.\u003c\/p\u003e\n\u003cp\u003eThis switch comes pre-set to turn the compressor on at 95 PSI and shut off at 125 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment. \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• PRESET 95-125 PSI\u003cbr\u003e• MINIMUM ON: 35 PSI\u003cbr\u003e• MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e• PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION \u003cbr\u003e• MAX AMPS, 26 AMPS AT 120VOLT \/ 20 AMP AT 240 VOLT\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486448742466,"sku":"LF10A-L1-95-125","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10a-l1-95-125-1-cs.jpg?v=1677196975"},{"product_id":"import-style-4-port-air-compressor-pressure-switch-95-125-psi","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp Lefoo  LF19-L4","description":"\u003cp\u003eImport style 95-125 PSI air compressor, pressure switch, control valve with a four-port connection manifold. The switch listed is a universal replacement pressure switch that replaces import syle, Condor brand and more. This switch is equipped with an unloader valve, on\/off pressure control button, and a four-port mounting manifold.\u003c\/p\u003e\n\u003cp\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly. This switch can be used on a single, two, or three-stage compressor.\u003c\/p\u003e\n\u003cp\u003eThis switch comes preset to turn the compressor on at 95 PSI and shut off at 125 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Preset Cut in Pressure: 95 PSI\u003cbr\u003e• Preset Cut Out Pressure: 125 PSI\u003cbr\u003e• Adjustable Pressure Setting\u003cbr\u003e• Differential: 28-55\u003cbr\u003e• Air Inlet: Four 1\/4\" Female NPT (If you need Male Threads Just add a pipe nipple)\u003cbr\u003e• Unloader Valve: 1\/4\" Push Lock (Unloader is located on the bottom of the switch)\u003cbr\u003e• There are 6 Wire Connections: (Two line in connections with a ground, and two motor connections with a ground.)\u003cbr\u003e• 26 amps @ 220-240 Volts\u003cbr\u003e• 26 amps @ 110-120 Volts\u003cbr\u003e• Minimum On: 30 PSI\u003cbr\u003e• Maximum Off: 155 PSI\u003cbr\u003e \u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486563561538,"sku":"LF19-L4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf19-l4-cs-1.jpg?v=1728515600"},{"product_id":"4-port-26-amp-95-125-psi-heavy-duty-pressure-switch","title":"4 Port Pressure Switch 26 Amp 95-125 PSI \nLF-10A-L4","description":"\u003cp style=\"text-align: center;\"\u003eBrand new heavy-duty, 26 Amp LEFOO 95-125 PSI air compressor, pressure switch, control valve with a 4 port connection manifold. The switch listed is a universal replacement pressure switch that replaces brands such as Furnas, Square-D and more. This switch is equipped with an unloader valve, on\/off lever, and a four-port mounting manifold. This is similar to the regular 4 port pressure switch, but this switch is equipped with heavy-duty 26Amp contacts to provide a longer-lasting switch in demanding applications. The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. These Ports can also be plugged if not needed which is what makes this switch a great universal replacement pressure switch.\u003cbr\u003e\u003cbr\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have an unloader line then this valve can be left not hooked up and the pressure switch will still function properly. This switch can be used on a single-stage or two-stage compressor as long as the amperage is less than 26 amps on 120 volt or 20 amps on 240 volt, however if this is being used with a magnetic starter on a larger compressor the amperage does not matter, in this case it is just used to turn the starter on \u0026amp; off at the set pressure. This switch comes pre set to turn the compressor on at 95 psi and shut off at 125 psi. This can be adjusted to any pressure within the factory minimum and maximum set points listed below. We have a picture showing the diagram for pressure adjustment.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e-PRESET 95-125 PSI\u003cbr\u003e-MINIMUM ON: 35 PSI\u003cbr\u003e-MAXIMUM OFF PRESSURE: 150 PSI\u003cbr\u003e-PRESSURE DIFFERENTIAL: 30-40 PSI\u003cbr\u003e-¼\" COMPRESSION UNLOADER VALVE CONNECTION\u003cbr\u003e-¼\" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1\/4\" FEMALE NTP PORTS.\u003cbr\u003e-MAX AMPS, 26 AMPS AT 120VOLT \/ 20 AMP AT 240 VOLT\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486787792962,"sku":"LF-10A-L4","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf-10a-l4-1-cs.jpg?v=1677262125"},{"product_id":"single-port-145-175-psi-metal-housing-pressure-switch","title":"1 Port Pressure Switch 145 - 175 PSI 26 Amp Lefoo LF17-H1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new, heavy duty, 145-175 PSI pressure switch for 2-Stage air compressors. Most 60-80 gallon compressors come with a light duty pressure switch and do not have a magnetic starter. This usually leads to the contacts in your switch burning up after little use. This switch is designed to handle 18-22 Amp motors without a magnetic starter. This switch will work with magnetic starters if you have one currently or if you add one later. This switch does not feature an on\/off lever so the compressor has to be turned off at the breaker to shut power off to the motor.\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e Preset ON\/OFF Pressure: 145-175 PSI\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" FEMALE NPT TANK CONNECTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\" COMPRESSION UNLOADER VALVE\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unbranded\/Generic","offers":[{"title":"Default Title","offer_id":12486891208770,"sku":"LF17-H1","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf17-h1_20comp.jpg?v=1723128700"},{"product_id":"single-port-import-style-140-175-psi-air-compressor-pressure-switch","title":"1 Port Pressure Switch 140 - 175 PSI 16 Amp LF19-H1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e                Brand new Import Style 140-175 PSI air compressor, pressure switch, control valve with a single port connection manifold. The switch listed is a universal replacement pressure switch that replaces import style, Condor brand and more. This switch is equipped with an unloader valve, on \/ off pressure control button, and a single port mounting manifold.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single, two, or three stage compressor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003ePreset Cut in Pressure: 140 PSI\u003cbr\u003ePreset Cut Out Pressure: 175 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAdjustable Pressure Setting\u003cbr\u003eDifferential: 35-55\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAir Inlet: Single 1\/4\" Female NPT (If you need Male Threads Just add a pipe nipple)\u003cbr\u003eUnloader Valve: 1\/4\" Push Lock (Unloader is located on the bottom of the switch)\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eThere are 6 Wire Connections: (Two line in connections with a ground, and two motor connections with a ground.)\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e26 amps @ 220-240 Volts\u003cbr\u003e26 amps @ 110-120 Volts\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cbr\u003eMinimum On: 70 PSI\u003cbr\u003eMaximum Off: 200 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486911197250,"sku":"LF19-H1","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lefoo-lf19-h1-front-image.jpg?v=1728515598"},{"product_id":"single-port-95-125-psi-metal-housing-pressure-switch","title":"1 Port Pressure Switch 105 - 135 PSI 26 Amp LF17-L1","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis listing is for a brand new heavy duty 105-135 PSI pressure switch for single stage air compressors. Most 60-80 gallon single stage compressors come with a light duty pressure switch that can burn out the contacts after only a little use. This switch is designed to handle 18-22 Amp electric motors. This switch is made without an on\/off lever so that you can shut the power off to the motor using the breaker.\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e\u003cbr\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003e•  Preset ON\/OFF pressure: 105-135 PSI\u003cbr\u003e• ¼\" FEMALE NPT TANK CONNECTION \u003cbr\u003e• ¼\" COMPRESSION UNLOADER VALVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486740246594,"sku":"LF17-L1","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf17-l1-1-cs.jpg?v=1677196974"},{"product_id":"4-port-air-compressor-pressure-switch-control-valve-140-175-psi-import-style","title":"4 Port Pressure Switch 140 -175 PSI 16 Amp Lefoo LF19A-H4","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eBrand new import style 140-175 PSI air compressor, pressure switch, control valve with a four port connection manifold. The switch listed is a universal replacement pressure switch that replaces import syle, Condor brand and more. This switch is equipped with an unloader valve, on \/ off pressure control button, and a four port mounting manifold.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThe unloader equipped on this switch is used to unload the air pressure off the head of the compressor when the compressor shuts off, this way when it starts there is no pressure on the piston and the compressor is able to start load free. This valve usually has a 1\/4\" plastic or copper line that runs to the check valve or the head of the compressor. If your compressor does not have a unloader line then this valve can be left not hooked up and the pressure switch will still function properly.\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 12pt;\"\u003eThis switch can be used on a single, two, or three stage compressor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003eThis switch comes pre set to turn the compressor on at 140 PSI and shut off at 175 PSI. This can be adjusted to any pressure within the factory minimum and maximum set points listed below.\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003ePreset Cut in Pressure: 140 PSI\u003cbr\u003ePreset Cut Out Pressure: 175 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAdjustable Pressure Setting\u003cbr\u003eDifferential: 28-55\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eAir Inlet: Four 1\/4\" Female NPT (If you need Male Threads Just add a pipe nipple)\u003cbr\u003eUnloader Valve: 1\/4\" Push Lock (Unloader is located on the bottom of the switch)\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003eThere are 6 Wire Connections: (Two line in connections with a ground, and two motor connections with a ground.)\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e26 amps @ 220-240 Volts\u003cbr\u003e26 amps @ 110-120 Volts\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: helvetica; font-size: 11pt;\"\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cbr\u003eMinimum On: 70 PSI\u003cbr\u003eMaximum Off: 200 PSI\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e \u003c\/div\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":12486877577282,"sku":"LF19A-H4","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf19a-h4-1-cs.jpg?v=1677110086"},{"product_id":"30-50-psi-adjustable-pressure-switch-well-water-pump-control-valve-lefoo-lf10-w","title":"30 - 50 PSI Water Pressure Switch Well Water Pump Control Valve 16 Amp Lefoo LF10-W","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eBrand new 30-50 PSI Adjustable Pressure Switch. This is a universal replacement switch most commonly used on well pumps and is equipped with a 1\/4\" female NPT input port located on the bottom of the switch. This switch comes preset from the factory to cut in at 30 PSI and cut out at 50 PSI. The cut in and cut out pressures are adjustable and there is a diagram on the inside of the pressure switch lid that shows how to properly adjust it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e• Corrosion Resistant and Non Metallic Cover\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• No Wire Looping\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Straight Through Wiring\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Visible Contacts 2 Pole Double Break\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• No Drift Pressure Settings\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Captive Cover Screw\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ample Wiring Room\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Ground Screws\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• Easy to Adjust\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e• 1\/4\" Female NPT Input\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":14287795421250,"sku":"LF10-W","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10-w-1-cs.jpg?v=1677023314"},{"product_id":"95-125-psi-4-port-pressure-switch-fits-hitachi-dewalt-emglo-compressors-lf10-l4h","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp 1\/4\" FNPT Lefoo LF10-L4H","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eLefoo 95-125 PSI Air Compressor Pressure Switch LF10-L4H\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eBrand new 95-125 PSI air compressor pressure switch or known as a pressure control valve. This switch has four ports on the bottom, one for air inlet hook up and the other three ports are usually used for a relief valve, gauges, or extra air outlets. These four ports are all 1\/4\" female NPT. This switch is also equipped with an on and off lever and an elbow style unloader valve on the side, which is 1\/4\" compression, if the unloader is not needed it does not need to be hooked up. For technical specifications please see below.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e• Air inlets:  four 1\/4\" npt female ports, which can be changed to male using a pipe nipple that can be bought at a local hardware store.\u003cbr\u003e• Elbow style unloader size: 1\/4\" compression\u003cbr\u003e• Equipped with manual on and off lever\u003cbr\u003e• Pressure setting: turns on at 95 psi and shuts off at 125 psi, can be adjusted for custom setting which is explained under the lid of the pressure switch.\u003cbr\u003e• Power and amp rating: 20 amps max at 120 volt, 12 amps max at 240 volt single phase, 9.6 amps max at 240 volt 3 phase.\u003cbr\u003e• ( if you have a larger industrial compressor with a magnetic starter amps do not matter, all the switch is doing is telling the starter when to shut on and off).\u003cbr\u003e• 12 volt power dc: 8.6 amps at 32 volts dc, 3.1 amps at 120 volt dc, 1.6 amps at 240 volt dc.\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":39652574920770,"sku":"LF10-L4H","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10-l4h-1-cs.jpg?v=1658871346"},{"product_id":"lefoo-95-125-psi-4-port-pressure-switch-fits-hitachi-dewalt-emglo-compressors","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp Lefoo LF10-L4-95-125","description":"\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e95 - 125 PSI 4 Port Pressure Switch 20 Amps\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003eBrand new 95-125 PSI air compressor pressure switch or known as a pressure control valve that is used on many Hitachi, DeWalt, and Emlgo compressors. This switch has four ports on the bottom for air inlet hook up, which are 1\/4\" female NPT. This switch is also equipped with an on and off push\/pull style button and an unloader valve which is 1\/4\" compression. For technical specifications please see below.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e• Pressure Rating: 95 - 125 PSI\u003cbr\u003e• Port Configuration: 4 Ports 1\/4\" NPT\u003cbr\u003e• Unloader Size: 1\/4\" Compression\u003cbr\u003e• Equipped with a Manual On and Off Push\/Pull Style\u003cbr\u003e• Pressure Setting is Adjustable\u003cbr\u003e• Max Amp Rating on 230 Volts: 20 Amps\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIf you have a larger industrial compressor with a magnetic starter, the amps do not matter.  All the switch is doing is telling the starter when to turn on and shut off.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":39912323645506,"sku":"LF10-L4-95-125","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf10-l4-95-125-1-cs.jpg?v=1677001594"},{"product_id":"lefoo-4-port-air-compressor-pressure-switch-control-valve-95-125-psi-lf19a-l4","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp Lefoo LF19A-L4","description":"\u003cp\u003e145-175 PSI air compressor pressure switch or known as a pressure control valve. This switch has one port on the bottom for air inlet hook up, which is 1\/4\" female NPT. This switch is also equipped with an on and off lever and an unloader valve on the side, which is 1\/4\" compression if the unloader is not needed it does not need to be hooked up.  This has a 1\/4\" Female NPT Pipe threads which can be changed to male using a pipe nipple from a local hardware store. For technical specifications please see below.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Air Inlet - 1\/4\" Female NPT Pipe Threads\u003cbr\u003e• Unloader Size: 1\/4\" Compression\u003cbr\u003e• Equipped with a Manual On and Off Lever\u003cbr\u003e• Pressure Setting: Turns on at 145 PSI and Shuts off at 175 PSI.  (Can be adjusted slightly)\u003c\/p\u003e\n\u003cp\u003ePower and Amp Rating:\u003c\/p\u003e\n\u003cp\u003e• 20 Amps MAX at 120 Volt\u003cbr\u003e• 12 Amps MAX at 240 Volt Single Phase\u003cbr\u003e• 9.6 Amps MAX at 240 Volt 3 Phase\u003c\/p\u003e\n\u003cp\u003e12 Volt Power DC\u003c\/p\u003e\n\u003cp\u003e• 8.6 AMPS at 32 Volts DC,\u003cbr\u003e• 3.1 AMPS at 120 Volt DC\u003cbr\u003e• 1.6 AMPS at 240 Volt DC\u003c\/p\u003e\n\u003cp\u003eIf you have a larger industrial compressor with a magnetic starter, the amps do not matter.  All the switch is doing is telling the starter when to Turn on and Shut Off.\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":40228802854978,"sku":"LF19A-L4","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/products\/lf19a-l4-1-cs.jpg?v=1678239398"},{"product_id":"lefoo-lf19-l4s-air-compressor-pressure-switch-95-125-psi-4-port-26-amp-heavy-duty","title":"4 Port Pressure Switch 95 - 125 PSI 26 Amp Lefoo LF19-L4S","description":"\u003cp\u003eLefoo LF19-L4S Pressure Switch 4-Port 95-125 PSI Heavy Duty\u003c\/p\u003e\n\u003cp\u003eThe Lefoo LF19-L4S Heavy Duty Pressure Switch is designed to keep your air compressor running efficiently and reliably. With a factory-set pressure range of 95-125 PSI, this pressure control switch is perfect for a wide variety of air compressor applications. Featuring 4 ports and a straight unloader, it ensures smooth operation and easy setup for multiple configurations.\u003c\/p\u003e\n\u003cp\u003eWith UL Listing and CSA Certification, this heavy-duty switch is built to last and rated for 26 amps, making it perfect for industrial and heavy-use applications.\u003c\/p\u003e\n\u003cp\u003eFeatures \u0026amp; Specifications:\u003c\/p\u003e\n\u003cp\u003e• Pressure Range: 95-125 PSI (Factory Set)\u003cbr\u003e• Ports: 4-Port 1\/4\" NPT (Female) air inlet\u003cbr\u003e• Unloader Valve: 1\/4\" compression, straight unloader connection\u003cbr\u003e• Switch Rating: Heavy Duty, 26A DPST switch\u003cbr\u003e• Certifications: UL Listed and CSA Certified for safety and reliability\u003cbr\u003e\u003cbr\u003eThis Lefoo LF19-L4S pressure switch is designed to handle tough jobs, keeping your air compressor running smoothly. Easy to install and built to last, it's the perfect upgrade for your compressor system!\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":41720412274754,"sku":"LF19-L4S","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf19-l4s-cs-1.jpg?v=1728573403"},{"product_id":"lefoo-110-150-psi-4-port-pressure-switch-air-compressor-control-with-unloader-20-amp-lf10-m4","title":"4 Port Pressure Switch 110 - 150 PSI 16 Amp Integral Unloader Lefoo LF10-M4","description":"\u003cp\u003eThis is a Lefoo LF10-M4 air compressor pressure switch, factory set to turn on at 110 PSI and off at 150 PSI, with an adjustable differential range between 35–50 PSI. Built for dependable performance, this 4-port pressure switch is UL Listed, CSA Certified, and rated for up to 20 Amps.\u003c\/p\u003e\n\u003cp\u003eIt features a 1\/4\" compression unloader valve connection and 1\/4\" female NPT tank port, making it a versatile option for many common compressor systems. The integrated DPST (double pole single throw) switch provides consistent power control in a compact, easy-to-install design.\u003c\/p\u003e\n\u003cp\u003eWhile this switch is manufactured by Lefoo, it is also compatible with select air compressor models from popular brands like Craftsman, DeWalt, Square D, Jenny, Black Max, Black \u0026amp; Decker, and others using a similar configuration.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Brand: Lefoo\u003cbr\u003e• Model: LF10-M4\u003cbr\u003e• Pressure Range: Factory set to 110 PSI (on) \/ 150 PSI (off)\u003cbr\u003e• Adjustable Differential: 35–50 PSI\u003cbr\u003e• Maximum Pressure Rating: 175 PSI\u003cbr\u003e• Switch Rating: 20A, DPST\u003cbr\u003e• Four (4) 1\/4\" Female NPT Ports\u003cbr\u003e• One (1) 1\/4\" Compression Unloader Valve Port\u003cbr\u003e• Certifications: UL Listed \u0026amp; CSA Certified\u003cbr\u003e• Includes: Compression nut and ferrule for unloader line\u003cbr\u003e• Configuration: Standard 4-port layout with ON\/OFF lever\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eCompatibility Disclaimer:\u003cbr\u003e\u003cbr\u003eThis is a Lefoo-manufactured product. Brand names such as Craftsman, DeWalt, Square D, Jenny, Black Max, and Black \u0026amp; Decker are listed for compatibility reference only. This part is not manufactured by or affiliated with those brands.\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":42105455771714,"sku":"LF10-M4","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf10-m4-cs-1-1.jpg?v=1752621874"},{"product_id":"lefoo-lf10a-m1n-single-port-air-compressor-pressure-switch-110-150-psi","title":"1 Port Pressure Switch 110 - 150 PSI 26 Amp Lefoo LF10A-M1N","description":"\u003cp\u003eThis is a Lefoo LF10A-M1N air compressor pressure switch, factory set to turn on at 110 PSI and off at 150 PSI, with an adjustable differential range between 35–50 PSI. Built for dependable performance, this Single-port pressure switch is UL Listed, CSA Certified, and rated for up to 26 Amps.\u003c\/p\u003e\n\u003cp\u003eIt features a 1\/4\" Male NPT tank port. \u003c\/p\u003e\n\u003cp\u003eWhile this switch is manufactured by Lefoo, it is also compatible with select air compressor models from popular brands like Craftsman, DeWalt, Square D, Jenny, Black Max, Black \u0026amp; Decker, and others using a similar configuration.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003e• Brand: Lefoo\u003cbr\u003e• Model: LF10A-M1N\u003cbr\u003e• Pressure Range: Factory set to 110 PSI (on) \/ 150 PSI (off)\u003cbr\u003e• Adjustable Differential: 35–50 PSI\u003cbr\u003e• Maximum Pressure Rating: 175 PSI\u003cbr\u003e• Switch Rating: 26A, DPST\u003cbr\u003e• Single (1) 1\/4\" Male NPT Port\u003cbr\u003e• Certifications: UL Listed \u0026amp; CSA Certified\u003cbr\u003e\u003cbr\u003eCompatibility Disclaimer:\u003cbr\u003e\u003cbr\u003eThis is a Lefoo-manufactured product. Brand names such as Craftsman, DeWalt, Square D, Jenny, Black Max, and Black \u0026amp; Decker are listed for compatibility reference only. This part is not manufactured by or affiliated with those brands.\u003c\/p\u003e","brand":"Lefoo","offers":[{"title":"Default Title","offer_id":42314438115394,"sku":"LF10A-M1N","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1491\/0694\/files\/lf10-m4-cs-1_b41cd5d6-0a7a-4fb3-aee5-e396ad6b4b1e.jpg?v=1752607385"}],"url":"https:\/\/compressor-source.com\/collections\/lefoo.oembed?page=2","provider":"Compressor Source","version":"1.0","type":"link"}