Customer Service was great quick shipment time packaging very well. No damage will leave another review after I get it going. I haven’t hooked it up yet.
Baldor L1512T 10 HP 1 Phase Electric Motor 1725 RPM 215T Frame 230V OPSB
Regular price
$2,603.37
Call 402-261-9563 for special pricing
Due to manufacturer policy, up-to-date pricing may only be available by phone, call for the latest quote.
Made in USA
The Baldor L1512T is a 10 HP single-phase air compressor duty electric motor built to handle the high starting load and torque that air compressors demand. It can be wired to run in either direction (CW or CCW).
Replacing a compressor motor? Match the frame, shaft, and mounting to your existing motor — and if you change the RPM, resize the pulley or sheave to keep your compressor's CFM. Not sure it will fit your setup? Contact us with your old motor's nameplate and we'll confirm the right replacement before you buy.
Backed by a Baldor (ABB) limited manufacturer's warranty — 18 months from installation or 24 months from date of manufacture, whichever comes first. We package every motor carefully so it arrives ready to install, and we stand behind every sale. Questions about fit or specs? Get in touch.
Recommended magnetic starters
A magnetic starter protects this motor from overload and lets a pressure switch turn it on and off. Sized to match this motor.
Shihlin Electric 10 HP 1-phase
$219.95
View
WEG 10 HP 1-phase
$222.95
View
Eaton 10 HP 1-phase
$289.95
View
Documents
Overview
| Horsepower | 10.0 HP |
|---|---|
| Speed Full-load (nameplate) shaft speed. | 1725 RPM |
| Frame NEMA frame size — sets the mounting bolt pattern, shaft height and shaft diameter. | 215T |
| Voltage | 230 V |
| Phase | Single Phase |
| Enclosure Motor housing type, e.g. TEFC (Totally Enclosed Fan Cooled) or ODP (Open Drip Proof). | OPSB |
| Mounting | Foot Mount (Rigid Base) |
| Shaft diameter | 1-3/8" |
| Country of origin Where this motor is manufactured, per the manufacturer / supplier documentation. | United States |
Electrical
| Full load amps Rated running current at full load. | 39.0 A |
|---|---|
| Locked rotor amps Inrush current drawn at startup, before the motor begins to turn. | 211.0 A |
| NEMA code letter NEMA locked-rotor kVA/HP code letter. | E |
| Efficiency at full load | 85.5% |
| Power factor Ratio of real to apparent power at full load. | 97% |
Performance & Torque
| Rated torque Continuous torque produced at the rated speed and load. | 30.4 ft-lb |
|---|---|
| Locked rotor torque Starting torque as a percentage of rated torque. | 257% |
| Breakdown torque Maximum torque the motor can produce before it stalls, as a percentage of rated torque. | 249% |
| Slip Percentage the loaded speed falls below synchronous speed. | 4.2% |
| Service factor Permissible continuous overload multiplier, e.g. 1.15 = 15% over rated HP. | 1.0 |
| NEMA design NEMA design letter (A/B/C/D) describing the torque and starting-current profile. | L |
Mechanical & Construction
| Frame material | Steel |
|---|---|
| Bearing (drive end) | 6307 |
| Bearing (opposite drive end) | 6206 |
| Lubricant / grease | Polyrex EM (-20F to +300F) |
| Overall length | 17.5″ |
Ratings & Environment
| Insulation class Winding insulation temperature rating (A/B/F/H). | F |
|---|---|
| Duty cycle S1 / Continuous means the motor can run indefinitely at rated load. | CONT |
| Ambient temperature Surrounding air temperature the rating is based on. | 40°C |
| Rotation | Reversible |
| Inverter rated Whether the windings are rated for variable-frequency-drive (VFD) operation. | No |
| Agency approvals | C UR US |
Wiring & Identification
| Leads / wire size | 2 @ 10 AWG (A Phase), 2 @ 14 AWG (B Phase) |
|---|---|
| Lead termination | Flying Leads |
| Connection diagram | 4-Lead, Cap Start / Cap Run w/ Relay, 1PH — CD2094 |
| Catalog number | L1512T |
| Product code | 37L969T923G1 |