WEG PESWS-B32V24AX-RM68 5 HP Single Phase Magnetic Starter with On/Off Buttons
NEMA 4X Enclosure
Brand new WEG PESWS-B32V24AX-RM68 5 horsepower, single phase, 208-240 volt magnetic starter with a NEMA 4X enclosure. This is a great quality starter with a built-in overload that is adjustable from 22-32 amps and is equipped with On/Off buttons, making this a great option for power washers and other equipment that will be in wet environments.
The PESW magnetic starters are ideal to protect motors and ensure reliable operation year after year. Assembled together in a NEMA 4x enclosure with On/Off buttons on the cover for quick and easy operation.
The NEMA 4X enclosure is constructed for either indoor or outdoor use to provide a degree of protection against falling dirt, rain, sleet, snow, windblown dust, splashing water, and hose-directed water. Will be undamaged by the external formation of ice on the enclosure.
Please note: this starter is not designed to be used with an air compressor as the signal from the pressure switch will conflict with the on/off buttons.
Professional Installation Recommended
Specifications:
• HP at 208-240 Volts: 5 HP
• HP at 115 Volts: 2 HP
• Overload Range Min (Amps): 22
• Overload Range Max (Amps): 32
• Coil Voltage: 208-240 Volts
• Phase: Single
• Frequency: 60Hz
• Enclosure Rating: NEMA 4X
• Enclosure Material: Plastic
• Push Button Function: On/Off
• Weight: 2.30
• Approximate Dimensions (W x H x D): 4-1/2" x 8-7/8" x 4-3/8"
Standard Features:
• Fast acceleration and high initial torque
• Bimetallic overload relays - class 10
• Adjustable trip current
• Ambient temperature compensated for -4°F to 140°F
• Phase-loss sensitivity protection
• On/Off Function
• Electrically isolated NO-NC auxiliary contacts
• UL, IEC, and CSA Certified
| Brand | WEG |
|---|---|
| Horsepower Maximum motor horsepower this starter is rated to control at the listed voltage and phase. | 5.0 HP |
| Phase | Single Phase |
| Voltage | 208-240 V |
| Frequency | 60 Hz |
| Overload adjustment range The overload relay’s adjustable trip-current band. Set the dial to roughly 115% of the motor’s full-load amps. | 22.0–32.0 A |
| Enclosure NEMA 1 = general-purpose indoor. NEMA 4X = washdown / outdoor, dust- and corrosion-resistant. | NEMA 4X |
| Country of origin Where this starter is manufactured, per the manufacturer / supplier documentation. | Mexico / Brazil |
| Catalog / part number | PESWS-B32V24AX-RM68 |
| Contactor type The magnetic contactor that switches power to the motor. | WEG CWB32 |
|---|---|
| Contactor rating | 32 A |
| Coil / control voltage The voltage that energizes the contactor coil — supplied by the pressure switch or control circuit. | 208-240 VAC |
| Control scheme The pilot devices wired in: e.g. Reset only, Start/Stop + Reset, or Hand-Off-Auto (HOA). | On/Off buttons |
| Auxiliary contacts Spare isolated contacts for interlocks, run indication, or a low-oil switch. | 1 NO + 1 NC, electrically isolated |
| Overload relay type Bimetallic relays trip on a heater element sized to the motor current; ambient-compensated means the trip point is stable across temperature. | Bimetallic, ambient-compensated |
|---|---|
| Trip class How long the relay tolerates locked-rotor current before tripping. Class 10 = within 10 s, standard for compressors. | Class 10 |
| Phase-loss protection Trips the motor off if one supply phase is lost, preventing single-phasing damage. | Yes |
| Enclosure material | Non-metallic (thermoplastic) |
|---|---|
| Dimensions (H × W × D) Approximate enclosure size from the manufacturer catalog. | 8.875″ H × 4.5″ W × 4.375″ D |
| Weight | 2.3 lb |
| Agency approvals | UL508A listed, cULus certified |
|---|---|
| Ambient temperature range | -4°F to +140°F (-20°C to +60°C) |
| Application notes | Factory pre-wired with On/Off buttons. Not for air-compressor use — the On/Off buttons conflict with a pressure switch signal. |
