Customer Service was great quick shipment time packaging very well. No damage will leave another review after I get it going. I haven’t hooked it up yet.
10 HP 1 Phase Magnetic Starter NEMA 1 208-230V 43 - 65 Amp P60TX
Regular price
$219.95
Brand new 10 horsepower single phase 208-230 volt magnetic starter with a steel housing. This is a great quality starter with a built in overload which is adjustable from 43-65 amps. Also has a manual reset button that can be switched to auto reset. The steel housing has six 1.25" punch out holes for incoming and outgoing wires. Also included are six rubber surround grommets for the 1.25" holes to protect the wires if needed. Starter comes with wiring instructions.
PROFESSIONAL INSTALLATION IS REQUIRED
Specifications:
Starter Housing Size:
13.25" Tall, 7.5" Wide, 6.5" Deep
Starter Rating:
10 HP, 208-230 Volt, Single Phase
Amp Rating: 43-65 Amps / Adjustable
If you are using this starter on an air compressor, you will also need a pressure switch to control the starter. In this application the pressure switch controls the On and Off of the starter according to the pressure setting of the pressure switch.
Due to this being an electrical item that can be installed incorrectly there is no warranty on this item after installation.
Overview
| Brand | Shihlin Electric |
|---|---|
| Horsepower Maximum motor horsepower this starter is rated to control at the listed voltage and phase. | 10.0 HP |
| Phase | Single Phase |
| Voltage | 208-230 V |
| Frequency | 60 Hz |
| Overload adjustment range The overload relay’s adjustable trip-current band. Set the dial to roughly 115% of the motor’s full-load amps. | 43.0–65.0 A |
| Enclosure NEMA 1 = general-purpose indoor. NEMA 4X = washdown / outdoor, dust- and corrosion-resistant. | NEMA 1 |
| Country of origin Where this starter is manufactured, per the manufacturer / supplier documentation. | China |
| Catalog / part number | P60TX |
Overload Protection
| Reset mode Manual reset requires pressing the button after a trip; automatic re-closes on cooldown. | Manual (switchable to automatic) |
|---|
Enclosure & Physical
| Enclosure material | Steel |
|---|---|
| Dimensions (H × W × D) Approximate enclosure size from the manufacturer catalog. | 13.25″ H × 7.5″ W × 6.5″ D |
Ratings & Compliance
| Application notes | For air-compressor use, control the starter with a pressure switch (sold separately). |
|---|