Customer Service was great quick shipment time packaging very well. No damage will leave another review after I get it going. I haven’t hooked it up yet.
15 HP 3 Phase Magnetic Starter NEMA 1 208-240V 43 - 65 Amp P50T
Regular price
$149.95
Shihlin 15 HP Three Phase Magnetic Starter Motor Control Switch 208/240V P50T
New 15 horsepower three phase 208-240 volt magnetic motor starter with a steel housing. This is a great quality starter with a built-in overload which is adjustable from 43-65 amps. Also has a manual reset button that can be switched to auto reset. The steel housing has four punch-out holes for incoming and outgoing wires that can be punched out to either 3/4" or 1 3/8". Also included are four rubber surround grommets for the 1 3/8" holes to protect the wires or plug an unused hole if needed. Starter comes with wiring instructions.
Features & Specifications:
• Starter Housing Size: 11" tall, 6.75" wide, 5.75" deep
• Starter Rating: 15hp, 220-240 Volt, 3 Phase
• Amp Rating: 43-65 Amps / Adjustable
• Will Also Work with 10 Hp if the Amperage is in the Range Stated.
"NOTE: PROFESSIONAL INSTALLATION IS REQUIRED"
If you are using this starter on an air compressor application you will also need a pressure switch to control the starter. In this application, the pressure switch controls the on and off of the starter depending on the pressure setting of the pressure switch.
-Due to this being an electrical item that can be installed incorrectly there is no warranty on this item, if there were to be any problems we will do our best to work with you.
Overview
| Brand | Shihlin Electric |
|---|---|
| Horsepower Maximum motor horsepower this starter is rated to control at the listed voltage and phase. | 15.0 HP |
| Phase | Three Phase |
| Voltage | 208-240 V |
| Frequency | 60 Hz |
| Overload adjustment range The overload relay’s adjustable trip-current band. Set the dial to roughly 115% of the motor’s full-load amps. | 43.0–65.0 A |
| Enclosure NEMA 1 = general-purpose indoor. NEMA 4X = washdown / outdoor, dust- and corrosion-resistant. | NEMA 1 |
| Country of origin Where this starter is manufactured, per the manufacturer / supplier documentation. | China |
| Catalog / part number | P50T |
Overload Protection
| Reset mode Manual reset requires pressing the button after a trip; automatic re-closes on cooldown. | Manual (switchable to automatic) |
|---|
Enclosure & Physical
| Enclosure material | Steel |
|---|---|
| Dimensions (H × W × D) Approximate enclosure size from the manufacturer catalog. | 11.0″ H × 6.75″ W × 5.75″ D |
Ratings & Compliance
| Application notes | For air-compressor use, control the starter with a pressure switch (sold separately). |
|---|