Customer Service was great quick shipment time packaging very well. No damage will leave another review after I get it going. I haven’t hooked it up yet.
5 HP 3 Phase 460/480 Volt Magnetic Air Compressor Starter
Brand new 5 horsepower three phase 460/480 volt magnetic starter with a steel housing. This is a great quality starter with a built in overload which is adjustable from 7-11 amps. Also has a manual reset button that can be switched to auto reset. The steel housing has four 1-1/8"punch out holes for incoming and outgoing wires. Also included are three rubber surround gromets for the 1-1/8" holes to protect the wires if needed. Starter comes with wiring instructions.
Specifications
• Starter Housing Size (H x W x D): 9" x 5-1/2" x 5-1/2"
• Starter Rating: 5 HP, 460/480 Volt, Three Phase
• Amp Rating: 7-11 Amps / Adjustable
If you currently have a 5 HP air compressor and the contacts on your pressure switch keep burning up, a starter is what is needed to fix the problem.
If you are using this starter on an air compressor, you will also need a pressure switch to control the starter. In this application the pressure switch controls when the starter turns on and off depending on the pressure setting of the pressure switch.
PROFESSIONAL INSTALLATION IS REQUIRED
Due to this being an electrical item, there is no warranty after installation.
Overview
| Brand | Shihlin Electric |
|---|---|
| Horsepower Maximum motor horsepower this starter is rated to control at the listed voltage and phase. | 5.0 HP |
| Phase | Three Phase |
| Voltage | 460-480 V |
| Frequency | 60 Hz |
| Overload adjustment range The overload relay’s adjustable trip-current band. Set the dial to roughly 115% of the motor’s full-load amps. | 7.0–11.0 A |
| Enclosure NEMA 1 = general-purpose indoor. NEMA 4X = washdown / outdoor, dust- and corrosion-resistant. | NEMA 1 |
| Country of origin Where this starter is manufactured, per the manufacturer / supplier documentation. | China |
| Catalog / part number | P11 |
Overload Protection
| Reset mode Manual reset requires pressing the button after a trip; automatic re-closes on cooldown. | Manual (switchable to automatic) |
|---|
Enclosure & Physical
| Enclosure material | Steel |
|---|---|
| Dimensions (H × W × D) Approximate enclosure size from the manufacturer catalog. | 9.0″ H × 5.5″ W × 5.5″ D |
Ratings & Compliance
| Application notes | For air-compressor use, control the starter with a pressure switch (sold separately). |
|---|