Unbranded/Generic

7.5 HP 3 Phase Magnetic Starter NEMA 1 208-240V 17 - 24 Amp P21A

Low stock: 1 available
SKU: MSP21A
$89.95
60-day returns No-hassle policy
US-based support Mon–Fri 8:30–4:30 CT
Same-day shipping Order by 1:30 PM CT
45+ years expertise Compressor specialists

Brand new 7.5 horsepower three phase 208-240 volt magnetic starter. This is a great quality starter with a built in overload which is adjustable from 17-24 amps. Also has a manual reset button that can be switched to auto reset. The steel housing has four 3/4"punch out holes for incoming and outgoing wires. Also included are three rubber surround grommets for the 3/4" holes to protect the wires if needed. Starter comes with basic wiring instructions.

PROFESSIONAL INSTALLATION IS REQUIRED


Specifications:

Starter Housing Size: 9" Tall, 5-1/2" Wide, 5-1/2" Deep

Starter Rating: 7.5 HP, 220-240volt, 3 Phase (will also work on 208v)

Amp Rating: 17-24 amps / adjustable


Due to this being an electrical item that can be installed incorrectly there is no warranty on this item once it has been installed.

Overview

Brand Shihlin Electric
Horsepower Maximum motor horsepower this starter is rated to control at the listed voltage and phase. 7.5 HP
Phase Three Phase
Voltage 208-240 V
Frequency 60 Hz
Overload adjustment range The overload relay’s adjustable trip-current band. Set the dial to roughly 115% of the motor’s full-load amps. 17.0–24.0 A
Enclosure NEMA 1 = general-purpose indoor. NEMA 4X = washdown / outdoor, dust- and corrosion-resistant. NEMA 1
Country of origin Where this starter is manufactured, per the manufacturer / supplier documentation. China
Catalog / part number P21A

Overload Protection

Reset mode Manual reset requires pressing the button after a trip; automatic re-closes on cooldown. Manual (switchable to automatic)

Enclosure & Physical

Enclosure material Steel
Dimensions (H × W × D) Approximate enclosure size from the manufacturer catalog. 9.0″ H × 5.5″ W × 5.5″ D

Ratings & Compliance

Application notes For air-compressor use, control the starter with a pressure switch (sold separately).