Brass valve with electronic control panel on a white background
CS-1PCD110 automatic electronic tank drain valve with power cord and plug
Side view of the CS-1PCD110 drain valve showing the brass body and strainer fitting
Close-up of the CS-1PCD110 timer control panel showing the ON/TEST/OFF switch and second/minute dials
Nameplate for the CS-1PCD110 drain valve showing AC110V 50Hz rating
Brass valve with electronic control panel on a white background
CS-1PCD110 automatic electronic tank drain valve with power cord and plug
Side view of the CS-1PCD110 drain valve showing the brass body and strainer fitting
Close-up of the CS-1PCD110 timer control panel showing the ON/TEST/OFF switch and second/minute dials
Nameplate for the CS-1PCD110 drain valve showing AC110V 50Hz rating
Compressor Source

Air Compressor Automatic Tank Water Drain Valve 1/2" NPT Electronic Dual Timer Drain CS-1PCD110

Ready to ship
SKU: CS-1PCD110
$32.95

Call 402-261-9563 for support and special pricing

Compressor Source products are backed by our live US-tech support team. Special and bulk ordering available

60-day returns No-hassle policy
US-based support Mon–Fri 8:30–4:30 CT
Same-day shipping Order by 3:00 PM CT
45+ years expertise Compressor specialists

The Compressor Source CS-1PCD110 is a 115-volt automatic, electronically timed, water-drain valve for removing condensate moisture from air compressor tanks. It can be set to drain between once every minute up to as long as every 45 minutes. The valve can be set to stay open between .5 and 10 seconds. These drains are most commonly set to drain for 3 seconds every 30-45 minutes. This valve also has a manual drain control button, labeled "Test", that can drain the tank at any time.

The CS-1PCD110 automatic drain plugs into a standard 110-120 Volt outlet and has a 5.5 ft long cord. It has a 1/2" MNPT air inlet, which measures approximately 3/4" in diameter, and a 1/2" FNPT air outlet. 

Specifications:

  • Interval Time: 0.5–45 minutes
  • Discharge Time: 0.05–10 seconds
  • Manual Test Switch: Yes
  • Current Consumption: Max 4 mA
  • Operating Temperature: -40°F to 122°F
  • Environmental Protection: IP65 (NEMA 4)
  • Case Material: ABS plastic, FR grade
  • Connection: DIN 43650A
  • Indicators: Yellow (open/closed)
  • Valve Type: 2/2-way direct-acting valve
  • In/Out Ports: 1/2" male/female NPT
  • Maximum Working Pressure: 16 bar
  • Media Temperature: Max 194°F
  • Valve Body: Forged brass
  • Insulation: Thermal Group H, 180°C
  • Supply Voltage: 115 volts

This automatic drain valve effectively removes moisture from compressor tanks, with customers praising its performance and time-saving benefits. Most shoppers found it "easy to install" and report it "works as advertised." However, one customer received a unit with defective NPT threads and experienced poor customer service response.

Compressor (positive)Moisture (positive)Time (positive)Installation (positive)Performance (positive)
  • 5 stars: 8 (80%)
  • 4 stars: 1 (10%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (10%)
S
Stephen S. (United States)

just what I was looking for.

J
Jacques V. (United States)

great addition and so helpful

B
Beaux Z.
In good working order.

Works as advertised.

S
SC D.
Works

Saves me lots of time and work. Keeps the water out of my air. I bought one for both my compressors.

S
Sue R.
super made works great great price do not know how long will last

works like it should

J
Jack S.
Works great

It was easy to install. You need to buy some brass fittings to reach outside the bottom of compressor. Works great. Really happy with performance.

j
jessie j.
Works as advertised

Purges the air compressor of moisture, thus extending the service life

V
Victor

The NPT threads on the unit I received were Bad I sent 4 emails to
COMPRESSOR SOURCE they never got back to me. I tossed it in the trash
Wont be buying from them in the future!

B
Billy
Perfect set-up

I installed this on my compressor tank drain. I have a plug wired so it's hot when the compressor motor is running. Each time the compressor kicks on, it blows for 10 seconds.

P
Philip A.
No problem with product.

There's not a problem with the product, in fact I received it 2 days ago. Fast shipping.