PURCHASED A PUMA PK-65 PUMP. AFTER VIEWING THE PUMA WEBSITE AND THE CS WEBSITE IT WAS DETERMINED THERE WAS A MAX RPM DISCREPANCY. I HAD ALREADY ORDERED A 3.5 INCH PULLEY, BUT IT WAS DETERMINED AFTER DISCUSSION, I NEEDED A 4 INCH. COMPRESSOR SOURCE ACKNOWLEDGED THE ERROR AND I WAS ABLE TO SEND THE WRONG ADVISED PULLEY BACK FREE OF CHARGE AND GET THE CORRECT ONE. SHIPPING WAS VERY VERY FAST AND APPRECIATIVE. THESE FOLKS ARE GREAT, BUT,I CANT SAY THE SAME FOR THE PUMP. THE WEBSITE SAYS 14-22 SCFM BUT I ONLY GOT 13.8 AT 90PSI USING THE WEBSITE CALCULATOR. I WAS HOPING FOR A BIT MORE, BUT I WILL DEAL WITH IT. I WISH I HAD WENT A DIFFERENT ROUTE ON THAT. BUT, WITH THAT BEING SAID, THE CUSTOMER SERVICE WAS SECOND TO NONE AND I WOULD GLADLY BUY FROM THESE FOLKS AGAIN.
1/4" NPT Condensate Timer Drain Midwest Control MCDV-25-120ADK 115V 230 PSI
Midwest Control MCDV-25-120ADK Automatic Timer Drain
This is a brand new 115 volt electronic, automatic timed, moisture drain for air compressors and air tanks. This drain can be set to drain as often as every 30 seconds or up to every 45 minutes. The valve can be set to stay open between .5 and 10 seconds. Most commonly, these drains are set to drain for 3 seconds every 30-45 minutes. This valve also has a "Test" button that you can use to manually drain it at any time.
Timer Specifications:
• Interval Time: 0.5 - 45 Minutes
• Discharge Time: 0.5 - 10 Seconds
• Supply Voltage: 115V
• Current Consumption: 4mA Max
• Environmental Protection: NEMA 4
• Case Material: ABS Plastic FR Grade
• Connection: DIN 43650A ISO4400/6952
• Operating Temperature: 34°F to 140°F
Valve Specifications:
• Type: 2-Way Direct Acting Valve
• Operating Temperature: 34°F to 140°F
• Valve Body: Machined Brass Bar
• Maximum Working Pressure: 230 PSI
• 4.5 MM Orifice
• Insulation: Thermal Group H
• Environmental Protection: IP 65/NEMA 4
• Mounting: Any Position
What's Included:
• 1 x Timer with 6 Foot Power Cord
• 1 x 2-Way Brass Valve
• 2 x 1/4" NPT Push Lock Fittings
• 2 x Three Foot 3/8" Polyurethane Hose

