PURCHASED A PUMA PK-65 PUMP. AFTER VIEWING THE PUMA WEBSITE AND THE CS WEBSITE IT WAS DETERMINED THERE WAS A MAX RPM DISCREPANCY. I HAD ALREADY ORDERED A 3.5 INCH PULLEY, BUT IT WAS DETERMINED AFTER DISCUSSION, I NEEDED A 4 INCH. COMPRESSOR SOURCE ACKNOWLEDGED THE ERROR AND I WAS ABLE TO SEND THE WRONG ADVISED PULLEY BACK FREE OF CHARGE AND GET THE CORRECT ONE. SHIPPING WAS VERY VERY FAST AND APPRECIATIVE. THESE FOLKS ARE GREAT, BUT,I CANT SAY THE SAME FOR THE PUMP. THE WEBSITE SAYS 14-22 SCFM BUT I ONLY GOT 13.8 AT 90PSI USING THE WEBSITE CALCULATOR. I WAS HOPING FOR A BIT MORE, BUT I WILL DEAL WITH IT. I WISH I HAD WENT A DIFFERENT ROUTE ON THAT. BUT, WITH THAT BEING SAID, THE CUSTOMER SERVICE WAS SECOND TO NONE AND I WOULD GLADLY BUY FROM THESE FOLKS AGAIN.
3 HP 1 Stage 12 CFM @ 90 PSI Air Compressor Pump 2-Cylinder Campbell Hausfeld VT4923
3 HP Campbell Hausfeld Replacement Compressor Pump VT4923 VT490000AV
Brand new two cylinder cast iron single stage air compressor pump. This is a 3 horsepower pump that will deliver up to 12 SCFM at 90 PSI. This pump is most commonly used on 60 gallon tanks. This pump needs minimum of a three horsepower motor, which is at least 15 amps at 220 volts. This pump comes complete as shown in the photos, including intake filter and pulley. See specifications below for more details.
Part numbers referenced below are examples of what this pump will fit. However, there are many more models that it will work for. Use specifications to verify fitment.
Specifications
• Two Cylinder
• Single Stage
• 3 HP
• Cast Iron Pump with Aluminum Head
• Equipped with Sight Glass for Easy Viewing of Oil Level
• Intake Threads: 1/2" FNPT
• Exhaust Threads: 3/8" FNPT
• Comes with Intake Filter
• Pulley Diameter: 10"
• Pulley Features Dual Set Screws for Secure Fit
• Oil Drain Hole Located Opposite of Shaft
• Weight: 35 LBS
• Up to 12 SCFM
• Good for Tanks up to 60 Gallons
• Designed to be a Replacement for Campbell Hausfeld Pumps and More
• Also Works Great as a Universal Replacement
Mounting Hole Dimensions Center to Center
• Front to Back: 6-1/2"
• Side to Side: 5-7/8"
Compatible Parts List
Campbell Hausfeld Parts
VT627000, VT622701, VT629100, VT470000AV, VT470200, VT203003, VT203001, VT200001, VT233301, VT23401, VT23350, VT4200, VT4300, VT4101, VT4150, VT510700, VT627504, VT619504, VT558804, VT633500, EX840500, VT619600AJ, VT618901, VT620800, VT627505, VT631403, VT631404AJ, VT635900, VT6359, VT619503AJ, VT627503AJ, VT558705, VT558801, VT559501, VT232605 FL-3305, FL3305, VT500601, VT-5006-01, VT558701, VT558701AJ, VT623803, VT623803AJ, VT6312, VS4001, VS400100AJ, VT619501, VT619501AJ, VT610101, VT610201, VT614804, VT614804AJ, VT490000AV, VT614601, VT614801 VT635500, VT639000, VT631504, VT559506
RIDGID Parts
GP90135, GP90135A, GP90150A
Maxus Parts
EX8003, EX800301, EX801300AJ, VT633000AJ, VT633001AJ EX801200, VT635300, EX558702
Husky Parts
VT6314, VT6314HDRB
Sears Craftsman
106.174541, 106.154580, 106.153680, 106.153781, 106.170641, 106.171941, 106.153783, 106.153684, 106.153784, 106.153992
Kobalt Parts
VT6362
Speedaire Parts
3Z408L, 3Z869J, 5F214A
If you have any questions about fitment, please reach out to us before purchasing.