WEG

WEG 1 HP 1 Phase Electric Motor 3485 RPM 56 Frame 115-208-230V ODP 00136OS1BCD56-S

Low stock: 2 available
SKU: 00136OS1BCD56-S
$247.42
60-day returns No-hassle policy
US-based support Mon–Fri 8:30–4:30 CT
Same-day shipping Order by 1:30 PM CT
45+ years expertise Compressor specialists

The WEG 00136OS1BCD56-S is a 1 HP single-phase air compressor duty electric motor built to handle the high starting load and torque that air compressors demand. It can be wired to run in either direction (CW or CCW).

Replacing a compressor motor? Match the frame, shaft, and mounting to your existing motor — and if you change the RPM, resize the pulley or sheave to keep your compressor's CFM. Not sure it will fit your setup? Contact us with your old motor's nameplate and we'll confirm the right replacement before you buy.

Backed by an 18-month WEG limited manufacturer's warranty from the invoice date. We package every motor carefully so it arrives ready to install, and we stand behind every sale. Questions about fit or specs? Get in touch.

Documents

Overview

Horsepower 1.0 HP
Speed Full-load (nameplate) shaft speed. 3500 RPM
Frame NEMA frame size — sets the mounting bolt pattern, shaft height and shaft diameter. 56
Voltage 115-230 V
Phase Single Phase
Poles 2
Enclosure Motor housing type, e.g. TEFC (Totally Enclosed Fan Cooled) or ODP (Open Drip Proof). ODP
Country of origin Where this motor is manufactured, per the manufacturer / supplier documentation. Mexico/Brazil

Electrical

Full load amps (low voltage) Rated running current on the low-voltage connection. 13.3 A
Full load amps (high voltage) Rated running current on the high-voltage connection. 6.67 A
Locked rotor amps Inrush current drawn at startup, before the motor begins to turn. 77.4/38.7 A
No-load current Current drawn spinning freely with no load on the shaft. 11.5/5.74 A
Locked rotor code (LRC) kVA-per-horsepower code letter that indicates starting inrush. 5.8x(Code K)
NEMA code letter NEMA locked-rotor kVA/HP code letter. K
Efficiency at full load 67.0%
Power factor Ratio of real to apparent power at full load. 73%

Performance & Torque

Rated torque Continuous torque produced at the rated speed and load. 1.5 ft-lb
Locked rotor torque Starting torque as a percentage of rated torque. 200%
Breakdown torque Maximum torque the motor can produce before it stalls, as a percentage of rated torque. 250%
Slip Percentage the loaded speed falls below synchronous speed. 2.78%
Service factor Permissible continuous overload multiplier, e.g. 1.15 = 15% over rated HP. 1.0
Locked rotor time How long the motor can safely remain stalled at startup current. 16s (cold) 9s (hot)

Mechanical & Construction

Lubricant / grease Mobil Polyrex EM
Approx. weight 24.3 lb

Ratings & Environment

Insulation class Winding insulation temperature rating (A/B/F/H). F
Protection degree IP rating for ingress of dust and water. IP21
Duty cycle S1 / Continuous means the motor can run indefinitely at rated load. Cont.(S1)
Ambient temperature Surrounding air temperature the rating is based on. -20°C to +40°C
Max altitude Maximum altitude for the rating, above sea level. 1000 m
Noise level 70.0 dB(A)
Rotation Both (CW and CCW)

Wiring & Identification

Catalog number 00136OS1BCD56-S
Product code 18670847