PURCHASED A PUMA PK-65 PUMP. AFTER VIEWING THE PUMA WEBSITE AND THE CS WEBSITE IT WAS DETERMINED THERE WAS A MAX RPM DISCREPANCY. I HAD ALREADY ORDERED A 3.5 INCH PULLEY, BUT IT WAS DETERMINED AFTER DISCUSSION, I NEEDED A 4 INCH. COMPRESSOR SOURCE ACKNOWLEDGED THE ERROR AND I WAS ABLE TO SEND THE WRONG ADVISED PULLEY BACK FREE OF CHARGE AND GET THE CORRECT ONE. SHIPPING WAS VERY VERY FAST AND APPRECIATIVE. THESE FOLKS ARE GREAT, BUT,I CANT SAY THE SAME FOR THE PUMP. THE WEBSITE SAYS 14-22 SCFM BUT I ONLY GOT 13.8 AT 90PSI USING THE WEBSITE CALCULATOR. I WAS HOPING FOR A BIT MORE, BUT I WILL DEAL WITH IT. I WISH I HAD WENT A DIFFERENT ROUTE ON THAT. BUT, WITH THAT BEING SAID, THE CUSTOMER SERVICE WAS SECOND TO NONE AND I WOULD GLADLY BUY FROM THESE FOLKS AGAIN.
5 HP 1 Stage 3-Cylinder 18 CFM @ 90 PSI Air Compressor Pump LPW6548
5 HP Replacement Single Stage Air Compressor Pump
Brand new three-cylinder cast iron single-stage air compressor pump. This is a 5 horsepower pump that will produce 22 SCFM and 18 CFM at 90 PSI. This pump is most commonly used on compressors under 60 gallons in size and can be used with a true 5 horsepower motor (these motors typically run at 20-23 amps on 230 volts). This pump comes complete as shown in the photos, including the intake filter and pulley. See specifications below for more details.
Features:
• Cast Iron Cylinder and Crankcase
• Equipped with Sight Glass for Easy Viewing of Oil Level
• Comes with Three Intake Filters
Specifications
• Three Cylinder
• Single Stage
• Recommended Motor Size: 5 HP
• SCFM at 1150 RPM (Max RPM): 22
• Cylinder Diameter: 65mm
• Cylinder Stroke: 48mm
• Pump Flywheel Diameter: 10.5"
• Working Pressure: 120 PSI
• Maximum Pressure: 140 PSI
• Net Weight: 55 lbs
• Outside Dimension (W x D x H): 18" x 12.5" x 15"