Everything was straight forward. Ordered item late in the evening and it was shipped out by the next afternoon. Very happy with item will do business with again.
3.15" Single Groove Pulley fits B Section V-Belt 5L with 1-1/8" Sheave Bushing BK30H
Use our easy Pulley Size & RPM Ratio Calculator to help verify sizing before you order!
Cast Iron 3.15" Single 1 Groove Belt B Section 5L Pulley w/ 1-1/8" Sheave Bushing
Masterdrive single groove 3.15" cast iron pulley/sheave with 1-1/8" H bushing for B section belt is a high-quality 2-piece pulley that measures 3.15" outside diameter and is designed to be used with an H style bushing. This bushing inserts into the center of the pulley and slides over the shaft, as you tighten down the bolts on the H bushing it will tighten down on the shaft. This style of pulley is much more secure than a standard single-piece pulley. The bushing is made of solid steel and precision machined to ensure high quality and secure attachment to your motor/engine shaft. This pulley accepts B Section also known as 5L series belts and is 1/2" wide.
Specifications:
• Solid Steel Bushing
• Single Groove Pulley
• 1-1/8" Bushing Included
• For Use on 1-1/8" Shaft
• Outside Diameter of Pulley: 3.15"
• High-Quality Cast Iron Construction
• Accepts: B Section / 5L Section Belts
Manufacturer Resources
Dimensions and Measurements
| Bore Diameter of the center hole that slides onto the shaft. | 1-1/8" |
|---|---|
| Outside diameter (O.D.) Overall diameter measured across the outer rim of the sheave. Use the pitch diameter, not this figure, for speed and ratio calculations. | 3.15" |
| Pitch diameter — 4L / A The effective diameter where a 4L or A section belt rides in the groove. This is the figure to use for drive speed and ratio calculations. | 2.4" |
| Pitch diameter — 5L / B The effective diameter where a 5L or B section belt rides in the groove. This is the figure to use for drive speed and ratio calculations. | 2.8" |
| Face width (F) Overall width of the sheave measured across the rim. | 7/8" |
| Dimension L | 1-1/4" |
| Dimension P | 7/8" |
| Dimension X | 1-3/8" |
| Overall length (O.L.) Overall length of the sheave measured through the hub. | 1-15/16" |
| Weight Approximate weight from the manufacturer catalog. | 1.4 lb |
Belt and Operational Information
| Belt sections The V-belt cross sections this sheave is designed to accept. | A, 4L, B, 5L |
|---|---|
| Number of grooves How many belts the sheave can carry. | 1 |
| Maximum speed Maximum recommended rim speed in feet per minute. Running a sheave faster than this risks failure. | 6500 FPM |
Product Information
| Part number Masterdrive catalog number for this sheave, including the bore size. | BK30H/H-1-1/8 |
|---|---|
| Sheave type Masterdrive construction designation for the sheave body, such as Type 3 with a solid web. | 1 s (Type 1, solid) |
| Construction Whether the sheave is bored to a finished size and keyed directly to the shaft, or requires a separate bushing to mount. | H-Bushing |
| Bushing The bushing style required to mount this sheave. "None (keyed)" means it mounts directly on the shaft. | H (powdered metal) |
| Material The material the sheave body is cast from. | Gray cast iron |
Bushing dimensions
| Bore Finished bore diameter — the shaft size this bushing fits. | 1-1/8" |
|---|---|
| Key seat Width and depth of the keyway machined into the bore. | 1/4 x 1/8" |
| Dimension A | 11/32" |
| Dimension B | 1-5/8" |
| Flange O.D. (D) Outside diameter of the flange on the wide end of the bushing. | 2-1/2" |
| Dimension E | 1" |
| Dimension L | 1-11/32" |
| Dimension O.D. | 2" |
| Weight Approximate weight from the manufacturer catalog. | 0.9 lb |
Installation
| Cap screws Quantity and size of the cap screws supplied to draw the bushing into the sheave. | (2) 1/4 x 1 |
|---|---|
| Recommended wrench torque Tighten the cap screws to this torque. Too little and the bushing can slip on the shaft; too much can crack it. | 95 lb-in (8 lb-ft) |
Bushing information
| Part number Masterdrive catalog number for this bushing. | STBH-1-1/8 |
|---|---|
| Bushing series The bushing family. A sheave is machined for one specific series, so the series must match. | H |
| Style How the bushing grips the shaft. A double split taper compresses onto the shaft as the cap screws are tightened. | Double Split Taper |
| Material The material this bushing is made from. | Powdered metal (incl. set screw over keyway) |

