After months of research and videos I decided on the after cooler for the 5-7.5 hp compressors. NOT a transmission coolers. pay attention folks two different functions and operating parameter designs.
The necessary fittings to reduce from 3/4 to 1/2 and the 90* fittings saved me a lot of trips looking for all the parts.
This is one of the better one stop shops for DIY folks needing air compressor parts and help.
Not a welder so am stuck figuring out how to wall mount the after-cooler but at least it will be on hand.
I will be a repeat customer for sure.
Air Compressor Automatic Tank Water Drain Valve 1/2" NPT Electronic Dual Timer Drain CS-1PCD110
Regular price
$32.95
Regular price
Special Price
$59.95
Sale price
$32.95
Call 402-261-9563 for support and special pricing
Compressor Source products are backed by our live US-tech support team. Special and bulk ordering available
The Compressor Source CS-1PCD110 is a 115-volt automatic, electronically timed, water-drain valve for removing condensate moisture from air compressor tanks. It can be set to drain between once every minute up to as long as every 45 minutes. The valve can be set to stay open between .5 and 10 seconds. These drains are most commonly set to drain for 3 seconds every 30-45 minutes. This valve also has a manual drain control button, labeled "Test", that can drain the tank at any time.
The CS-1PCD110 automatic drain plugs into a standard 110-120 Volt outlet and has a 5.5 ft long cord. It has a 1/2" MNPT air inlet, which measures approximately 3/4" in diameter, and a 1/2" FNPT air outlet.
Specifications:
- Interval Time: 0.5–45 minutes
- Discharge Time: 0.05–10 seconds
- Manual Test Switch: Yes
- Current Consumption: Max 4 mA
- Operating Temperature: -40°F to 122°F
- Environmental Protection: IP65 (NEMA 4)
- Case Material: ABS plastic, FR grade
- Connection: DIN 43650A
- Indicators: Yellow (open/closed)
- Valve Type: 2/2-way direct-acting valve
- In/Out Ports: 1/2" male/female NPT
- Maximum Working Pressure: 16 bar
- Media Temperature: Max 194°F
- Valve Body: Forged brass
- Insulation: Thermal Group H, 180°C
- Supply Voltage: 115 volts