PURCHASED A PUMA PK-65 PUMP. AFTER VIEWING THE PUMA WEBSITE AND THE CS WEBSITE IT WAS DETERMINED THERE WAS A MAX RPM DISCREPANCY. I HAD ALREADY ORDERED A 3.5 INCH PULLEY, BUT IT WAS DETERMINED AFTER DISCUSSION, I NEEDED A 4 INCH. COMPRESSOR SOURCE ACKNOWLEDGED THE ERROR AND I WAS ABLE TO SEND THE WRONG ADVISED PULLEY BACK FREE OF CHARGE AND GET THE CORRECT ONE. SHIPPING WAS VERY VERY FAST AND APPRECIATIVE. THESE FOLKS ARE GREAT, BUT,I CANT SAY THE SAME FOR THE PUMP. THE WEBSITE SAYS 14-22 SCFM BUT I ONLY GOT 13.8 AT 90PSI USING THE WEBSITE CALCULATOR. I WAS HOPING FOR A BIT MORE, BUT I WILL DEAL WITH IT. I WISH I HAD WENT A DIFFERENT ROUTE ON THAT. BUT, WITH THAT BEING SAID, THE CUSTOMER SERVICE WAS SECOND TO NONE AND I WOULD GLADLY BUY FROM THESE FOLKS AGAIN.
Replacement Filter Element for F9000 Series In-Line Compressed Air Moisture Filters F9607
F9000 Series In Line Compressor Moisture Separator Filter Element
Brand new F9607 5 micron filter element for F9000 series compressed air in line moisture / water filter separator filters. This is a 5 micron 9000 series filter element. This works with the following models of filters for separating moisture from your air lines: F906, F908, F906N, F908N, C906N, C906NA, C908N, and C908NA. Note: On the C series FRL combination Assembly's this is the element for the filter bowl only.
This element is designed to separate moisture from your air line and is made to be used in the moisture section of your air line filter.
Specifications:
• Part Number: F9607
• To be used in F9000 Series Moisture Filters
• 5 Micron Filter Element
• Length: 3-15/16"
• Outside Diameter: 1-9/16"
• Thickness of Filter Wall: Approx. 1/8"